# -*- coding: utf-8 -*- # !/usr/bin/env python import datetime import logging import time from decimal import Decimal from typing import TYPE_CHECKING from apilib.monetary import RMB from apilib.utils_string import split_str from apps.web.south_intf.yuhuan_fire import YuhuanNorther from apps.web.constant import Const, DeviceCmdCode, ErrorCode, DeviceErrorCodeDesc, MQTT_TIMEOUT from apps.web.core.adapter.base import SmartBox, fill_2_hexByte, make_six_bytes_session_id from apps.web.core.exceptions import ServiceException from apps.web.core.networking import MessageSender from apps.web.device.models import Device from apps.web.user.models import ConsumeRecord logger = logging.getLogger(__name__) if TYPE_CHECKING: from apps.web.device.models import GroupDict class GaoBoRuiChargingBox(SmartBox): """ 高宝瑞电川版本 """ def __init__(self, device): super(GaoBoRuiChargingBox, self).__init__(device) def _check_package(self, package): """ 获取设备启动的发送数据 根据设备的当前模式以及套餐获取 :param package: :return: """ consumeModule = self._device.get('otherConf', dict()).get('consumeModule', 0) unit = package.get('unit', u'分钟') _time = float(package.get('time', 0)) # 按时间计费 if consumeModule == 0: billingType = 'time' if unit == u'小时': _time = _time * 60 elif unit == u'天': _time = _time * 24 * 60 elif unit == u'秒': _time = _time / 60 elif unit == u'分钟': _time = _time else: raise ServiceException({'result': 2, 'description': u'套餐单位错误，请联系经销商'}) # 按电量计费 else: billingType = 'elec' if unit != u'度': raise ServiceException({'result': 2, 'description': u'套餐单位错误，请联系经销商'}) else: _time = _time * 100 return _time, unit, billingType def translate_funcode(self, funCode): funCodeDict = { '01': u'获取端口数量', '02': u'移动支付', '0C': u'获取设备设置', '08': u'设置设备参数', '06': u'获取设备端口详情', '07': u'获取刷卡投币统计数据', '09': u'设置刷卡投币使能', '0A': u'端口使能', '0B': u'端口关闭', '16': u'设置设备参数', '20': u'设备重启', '13': u'设置卡充满退费', '15': u'获取功率费率配置', '14': u'设置功率费率配置', '12': u'充值', '22': u'回复卡充值', } return funCodeDict.get(funCode, '') def translate_event_cmdcode(self, cmdCode): cmdDict = { '03': u'投币上报', '04': u'刷卡上报', '05': u'充电结束', '16': u'充电结束', '10': u'刷卡上报', '0D': u'故障', '20': u'启动设备', '11': u'刷卡使用', '12': u'卡充值', '22': u'ID卡扣费', '23': u'ID卡扣费状态', '17': u'IC卡回收余额成功', } return cmdDict.get(cmdCode, '') def is_port_can_use(self, port, canAdd = False): # 电川的在启动的时候去判断是否需要续充 return True, '' def check_dev_status(self, attachParas = None): """ 如果超过两个心跳周期没有报心跳,并且最后一次更新时间在2个小时内,需要从设备获取状态 否则以缓存状态为准。 :param attachParas: :return: """ if attachParas is None: raise ServiceException({'result': 0, 'description': u'请您选择合适的充电端口、电池类型信息'}) if not attachParas.has_key('chargeIndex'): raise ServiceException({'result': 0, 'description': u'请您选择合适的充电端口'}) if not self.device.need_fetch_online: raise ServiceException( {'result': 2, 'description': DeviceErrorCodeDesc.get(ErrorCode.DEVICE_CONN_CHECK_FAIL)}) self.get_port_status_from_dev() group = self.device.group # type: GroupDict if group.is_free: logger.debug('{} is free. no need to check continue pay.'.format(repr(self.device))) return # 处理是否能够续充 portDict = self.get_port_status_from_dev() port = str(attachParas['chargeIndex']) if port in portDict: isCanAdd = self.device['devType'].get('payableWhileBusy', False) if portDict[port]['status'] == Const.DEV_WORK_STATUS_IDLE: return elif portDict[port]['status'] == Const.DEV_WORK_STATUS_FAULT: raise ServiceException({'result': 0, 'description': u'该端口故障，暂时不能使用'}) elif portDict[port]['status'] == Const.DEV_WORK_STATUS_WORKING: if isCanAdd: return else: raise ServiceException({'result': 0, 'description': u'该端口正在工作不能使用，请您使用其他端口'}) elif portDict[port]['status'] == Const.DEV_WORK_STATUS_FORBIDDEN: raise ServiceException({'result': 0, 'description': u'该端口已被禁止使用，请您使用其他端口'}) elif portDict[port]['status'] == Const.DEV_WORK_STATUS_CONNECTED: return else: raise ServiceException({'result': 0, 'description': u'端口状态未知，暂时不能使用'}) else: raise ServiceException({'result': 0, 'description': u'未知端口，暂时不能使用'}) def test(self, coins): hexPort = fill_2_hexByte(hex(int(1)), 2) hexTime = fill_2_hexByte(hex(5)) devInfo = MessageSender.send(device = self.device, cmd = DeviceCmdCode.OPERATE_DEV_SYNC, payload = { 'IMEI': self._device['devNo'], 'funCode': '02', 'data': hexPort + '0000' + hexTime }, timeout = MQTT_TIMEOUT.SHORT) return devInfo def port_is_busy(self, port_dict): if not port_dict: return False if 'billingType' not in port_dict: return False if 'status' not in port_dict: return False if 'coins' not in port_dict: return False if 'price' not in port_dict: return False if port_dict['billingType'] not in ['time', 'elec']: return False if port_dict['billingType'] == 'time': if 'needTime' not in port_dict: return False else: if 'needElec' not in port_dict: return False if port_dict['status'] == Const.DEV_WORK_STATUS_WORKING: return True else: return False def start_device(self, package, openId, attachParas): if attachParas is None: raise ServiceException({'result': 2, 'description': u'请您选择合适的充电线路、电池类型信息'}) if not attachParas.has_key('chargeIndex'): raise ServiceException({'result': 2, 'description': u'请您选择合适的充电线路'}) price = float(package['price']) dev = Device.objects.get(devNo = self._device['devNo']) refundProtection = dev.otherConf.get('refundProtection', 0) refundProtectionTime = dev.otherConf.get('refundProtectionTime', 5) port = hex(int(attachParas['chargeIndex'])) hexPort = fill_2_hexByte(port, 2) _time, unit, billingType = self._check_package(package) coins = float(package['coins']) hexTime = fill_2_hexByte(hex(int(_time))) write_data = 'EE0D02{}'.format(make_six_bytes_session_id()) + hexPort + '0000' + hexTime devInfo = MessageSender.send( device = self.device, cmd = DeviceCmdCode.PASSTHROUGH_OPERATE_DEV_SYNC, payload = { 'IMEI': self._device['devNo'], 'funCode': '02', 'data': write_data }, timeout = MQTT_TIMEOUT.START_DEVICE) usePort = int(attachParas['chargeIndex']) if 'rst' not in devInfo: raise ServiceException( { 'result': 2, 'description': u'启动设备失败，您的支付金额已经退还，请重新扫码设备试试(1001)' }) if devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( { 'result': 2, 'description': u'充电桩正在玩命找网络，您的金币还在，重试不需要重新付款，建议您试试旁边其他设备，或者稍后再试哦' }) elif devInfo['rst'] == 1: self.check_serial_port_for_startcmd(attachParas['chargeIndex']) else: raise ServiceException( { 'result': 2, 'description': u'启动设备失败，您的支付金额已经退回，请重新扫码设备({})'.format(devInfo['rst']) }) else: if 'data' not in devInfo: logger.warning('no data in success response. result = {}'.format(str(devInfo))) raise ServiceException( { 'result': 2, 'description': u'启动设备失败，您的支付金额已经退还，请重试' }) else: data = devInfo['data'][18::] result = data[2:4] if result == '01': # 成功 pass elif result == '02': newValue = {str(usePort): {'status': Const.DEV_WORK_STATUS_FAULT, 'statusInfo': u'充电站故障'}} Device.update_dev_control_cache(self._device['devNo'], newValue) raise ServiceException({'result': 2, 'description': u'充电站故障'}) elif result == '03': newValue = {str(usePort): {'status': Const.DEV_WORK_STATUS_WORKING, 'statusInfo': u''}} Device.update_dev_control_cache(self._device['devNo'], newValue) raise ServiceException({'result': 2, 'description': u'该端口正在使用中'}) else: raise ServiceException({ 'result': 2, 'description': u'启动设备失败({})，您的支付金额已经退回，请重新扫码设备'.format(result) }) portDict = { 'startTime': datetime.datetime.now().strftime('%Y-%m-%d %H:%M:%S'), 'status': Const.DEV_WORK_STATUS_WORKING, 'coins': coins, 'price': price, 'billingType': billingType, 'isStart': True, 'openId': openId, 'refunded': False, 'vCardId': self._vcard_id, 'refundProtection': refundProtection, 'refundProtectionTime': refundProtectionTime } ctrInfo = Device.get_dev_control_cache(self._device.devNo) lastPortInfo = ctrInfo.get(str(usePort), None) if self.port_is_busy(lastPortInfo) and \ lastPortInfo.get('billingType') == billingType and \ lastPortInfo.get('openId') == openId: is_continus = True portDict['coins'] = float(coins) + lastPortInfo['coins'] portDict['price'] = float(price) + lastPortInfo['price'] else: is_continus = False portDict['coins'] = float(coins) portDict['price'] = float(price) if 'linkedRechargeRecordId' in attachParas and attachParas.get('isQuickPay', False): if is_continus: payInfo = lastPortInfo.get('payInfo', list()) if not payInfo: logger.warning('miss payInfo! {}-{}'.format(self._device['devNo'], usePort)) else: payInfo = list() payInfo.append({'rechargeRcdId': str(attachParas['linkedRechargeRecordId'])}) portDict['payInfo'] = payInfo if billingType == 'time': if is_continus: portDict['needTime'] = _time + lastPortInfo['needTime'] else: portDict['needTime'] = _time finishedTime = int(time.time()) + int(portDict['needTime'] * 60) else: if is_continus: portDict['needElec'] = _time / 100.0 + lastPortInfo['needElec'] else: portDict['needElec'] = _time / 100.0 finishedTime = int(time.time()) + 60 * 60 * 12 portDict.update({'finishedTime': finishedTime}) if 'orderNo' in attachParas: portDict.update({'orderNo': attachParas['orderNo']}) # 记一笔 try: start_uart_data = { 'send': write_data, 'receive': devInfo } ConsumeRecord.objects.filter(orderNo=attachParas['orderNo']).update( servicedInfo__start_uart_data=start_uart_data) except: pass Device.update_dev_control_cache( self._device['devNo'], { str(usePort): portDict }) devInfo['finishedTime'] = finishedTime # 玉环的对接，放这里吧 YuhuanNorther.send_dev_status(self._device, int(attachParas['chargeIndex']), 1) return devInfo def start_device_realiable(self, order): attachParas = order.attachParas package = order.package if attachParas is None: raise ServiceException({'result': 2, 'description': u'请您选择合适的充电线路、电池类型信息'}) if not attachParas.has_key('chargeIndex'): raise ServiceException({'result': 2, 'description': u'请您选择合适的充电线路'}) dev = Device.objects.get(devNo = self._device.devNo) port = hex(int(attachParas['chargeIndex'])) hexPort = fill_2_hexByte(port, 2) _time, unit, billingType = self._check_package(package) coins = float(package['coins']) hexTime = fill_2_hexByte(hex(int(_time))) result = MessageSender.send(device = self.device, cmd = DeviceCmdCode.OPERATE_DEV_SYNC, payload = { 'IMEI': self._device.devNo, 'funCode': '02', 'order_id': order.orderNo, 'order_type': 'com_start', 'data': hexPort + '0000' + hexTime }, timeout = 45, retry = 3) return result def analyze_event_data(self, data): cmdCode = data[4:6] if cmdCode == '05': port = int(data[18:20], 16) leftTime = int(data[20:24], 16) reason = data[24:26] # todo cardNo = str(int(data[26:34], 16)) backMoney = int() if reason == '00': desc = u'购买的充电时间或者电量已经用完' elif reason == '01': desc = u'系统判断为异常断电（插头被拔或者松动，或者电瓶已经充满），电瓶车充电器种类繁多，可能存在误差' elif reason == '02': desc = u'电池已经充满' elif reason == '03': desc = u'设备或者端口故障。建议您根据已经充电的时间评估是否需要到现场换到其他端口充电' elif reason == '04': desc = u'警告！您的电池功率超过本机最大限制。为了公共安全，不建议您在该充电桩充电' elif reason == '05': desc = u'刷卡退费结束' elif reason == '06': desc = u'可能是插头被拔掉或者未连接充电器。如果不是自己操作，建议您到现场检查是否有人误操作' elif reason == '07': desc = u'远程方式停止充电。如果不是自己操作，建议到现场尽快恢复充电' else: desc = u'' # 刷卡充电的结束 if len(data) > 34: cardNo = str(int(data[26:34], 16)) backMoney = int(data[34:36], 16) / 10.0 cardType = 'ID' if data[36:40] == 'AA33' else 'IC' if cardNo != str(0): return {'status': Const.DEV_WORK_STATUS_IDLE, 'cmdCode': cmdCode, 'port': port, 'leftTime': leftTime, 'reason': desc, 'isStart': False, 'cardNo': cardNo, 'backMoney': backMoney, 'cardType': cardType, 'endType': reason, 'reasonCode': reason, 'uartData': data} else: return {'status': Const.DEV_WORK_STATUS_IDLE, 'cmdCode': cmdCode, 'port': port, 'leftTime': leftTime, 'reason': desc, 'isStart': False, 'endType': reason, 'reasonCode': reason, 'uartData': data} # 非刷卡充电的结束 else: return {'status': Const.DEV_WORK_STATUS_IDLE, 'cmdCode': cmdCode, 'port': port, 'leftTime': leftTime, 'reason': desc, 'isStart': False, 'endType': reason, 'reasonCode': reason, 'uartData': data} elif cmdCode == '16': # 高版本的 port = int(data[8:10], 16) leftTime = int(data[10:14], 16) elec = int(data[14:18], 16) reason = data[18:20] if reason == '00': desc = u'您购买的充电时间用完了。' elif reason == '01': desc = u'可能是插头被拔掉，或者电瓶已经充满。系统判断为异常断电，由于电瓶车充电器种类繁多，可能存在误差。如有问题，请您及时联系商家协助解决问题并恢复充电。' elif reason == '02': desc = u'恭喜您！电池已经充满电！' elif reason == '03': desc = u'警告！您的电池功率超过本机最大限制，已经停止充电，为了公共安全，不建议您在该充电桩充电！提醒您，为了安全大功率的电池不要放入楼道、室内等位置充电哦' elif reason == '04': desc = u'管理人员可能远程断电了，建议您根据已经充电的时间评估是否需要到现场换到其他端口充电。' elif reason == '0B': desc = u'设备或端口出现问题，为了安全起见，被迫停止工作。建议您根据已经充电的时间评估是否需要到现场换到其他端口充电。' else: desc = '' return {'status': Const.DEV_WORK_STATUS_IDLE, 'reason': desc, 'cmdCode': cmdCode, 'port': port, 'leftTime': leftTime, 'elec': elec, 'isStart': False, 'uartData': data} elif cmdCode == '0D': port = int(data[16:18], 16) errCode = data[18:20] if errCode == '01': return {'statusInfo': u'端口输出故障', 'cmdCode': cmdCode, 'port': port, 'FaultCode': errCode, 'uart': data} elif errCode == '02': return {'statusInfo': u'机器整体充电功率过大', 'cmdCode': cmdCode, 'port': port, 'FaultCode': errCode, 'uart': data} elif errCode == '03': return {'statusInfo': u'电源故障', 'cmdCode': cmdCode, 'port': port, 'FaultCode': errCode, 'uart': data} elif cmdCode == '10': # 用户刷卡上报的信息 cardNo = data[8:16] cardNo = str(int(cardNo, 16)) preFee = int(data[16:18], 16) / 10.0 oper = data[18:20] return {'cardNo': cardNo, 'preFee': preFee, 'cmdCode': cmdCode, 'oper': oper} elif cmdCode == '20': # 启动设备 port = int(data[8:10], 16) needTime = int(data[10:14], 16) elec = int(data[14:18], 16) consumeType = data[18:20] money = int(data[20:22], 16) return {'cmdCode': cmdCode, 'port': port, 'needTime': needTime, 'elec': elec, 'consumeType': consumeType, 'coins': money} elif cmdCode == '03': # 投币上报 coin = int(data[18:20], 16) port = int(data[20:22], 16) return {'cmdCode': cmdCode, 'coins': coin, 'port': port} elif cmdCode == '11': # 刷卡后，按下端口，上报的报文 cardNo = int(data[18:26], 16) cardNo = str(cardNo) fee = int(data[26:28], 16) / 10.0 balance = int(data[28:32], 16) / 10.0 cardType = 'ID' if data[32:36] == 'AA33' else 'IC' port = int(data[36:38], 16) status = data[38:40] return {'cardNo': cardNo, 'fee': fee, 'balance': balance, 'cardType': cardType, 'port': port, 'status': status, 'cmdCode': cmdCode} elif cmdCode == '12': cardNo = data[18:26] cardNo = str(int(cardNo, 16)) balance = int(data[26:30], 16) / 10.0 cardType = 'ID' if data[30:34] == 'AA33' else 'IC' return {'cmdCode': cmdCode, 'balance': balance, 'cardType': cardType, 'cardNo': cardNo} elif cmdCode == '04': # 旧版本的刷卡报文 money = int(data[18:20], 16) return {'cmdCode': cmdCode, 'money': money} elif cmdCode == '30': # 宇泽家的，主动上报电流 portData = data[18:48] port1 = int(portData[2:4]) port2 = int(portData[4:6]) port3 = int(portData[6:8]) port4 = int(portData[8:10]) port5 = int(portData[10:12]) port6 = int(portData[12:14]) port7 = int(portData[14:16]) port8 = int(portData[16:18]) port9 = int(portData[18:20]) port10 = int(portData[20:22]) device = int(portData[22:24]) return { 'cmdCode': cmdCode, 'port1': port1, 'port2': port2, 'port3': port3, 'port4': port4, 'port5': port5, 'port6': port6, 'port7': port7, 'port8': port8, 'port9': port9, 'port10': port10, 'device': device, } elif cmdCode == '31': # 宇泽家的，主动上报温度 portData = data[18:48] port1 = int(portData[2:4]) port2 = int(portData[4:6]) port3 = int(portData[6:8]) port4 = int(portData[8:10]) port5 = int(portData[10:12]) port6 = int(portData[12:14]) port7 = int(portData[14:16]) port8 = int(portData[16:18]) port9 = int(portData[18:20]) port10 = int(portData[20:22]) device = int(portData[22:24]) return { 'cmdCode': cmdCode, 'port1': port1, 'port2': port2, 'port3': port3, 'port4': port4, 'port5': port5, 'port6': port6, 'port7': port7, 'port8': port8, 'port9': port9, 'port10': port10, 'device': device, } elif cmdCode == '32': # 宇泽家的，主动上报温度 if data[18:20] == '01': return {'isYangan': True, 'cmdCode': cmdCode} else: return {'isYangan': False, 'cmdCode': cmdCode} elif cmdCode == '17': """ IC卡回收余额成功，上报回收的数目 样例 660F170048614800052DDA5A0D000001DD """ cardNo = int(data[18:26], 16) cardNo = str(cardNo) backMoney = int(data[26:30], 16) / 10.0 return {'cmdCode': cmdCode, 'cardNo': cardNo, 'backMoney': backMoney} elif cmdCode == '22': # ID卡，上报上来扣费 cardNo = int(data[18:26], 16) cardNo = str(cardNo) fee = int(data[26:28], 16) / 10.0 cardType = 'ID' if data[28:32] == 'AA33' else 'IC' return {'cmdCode': cmdCode, 'cardNo': cardNo, 'fee': fee, 'cardType': cardType} elif cmdCode == '23': # ID卡，上报上来扣费 cardNo = int(data[18:26], 16) cardNo = str(cardNo) status = data[26:28] return {'cmdCode': cmdCode, 'cardNo': cardNo, 'status': status} elif cmdCode == '35': temperature = int(data[18:20], 16) smoke = int(data[20:22], 16) voltage = int(data[22:26], 16) return {'cmdCode': cmdCode, 'temperature': temperature, 'smokeWarning': (smoke == 0x01), 'voltage': voltage} elif cmdCode == '41': return {'cmdCode': cmdCode, 'smokeWarning': True} def get_dev_consume_count(self): devInfo = MessageSender.send(self.device, DeviceCmdCode.OPERATE_DEV_SYNC, {'IMEI': self._device['devNo'], 'funCode': '07', 'data': '00'}) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试。也可能是您的设备版本过低，暂时不支持此功能'}) data = devInfo['data'][16::] cardFee = int(data[2:6], 16) / 10.0 # 以角为单位 coinFee = int(data[6:10], 16) # 以元为单位 return {'cardFee': cardFee, 'coinFee': coinFee} def get_port_info(self, line): data = fill_2_hexByte(hex(int(line)), 2) devInfo = MessageSender.send(self.device, self.make_random_cmdcode(), {'IMEI': self._device['devNo'], 'funCode': '06', 'data': data}) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试。也可能是您的设备版本过低，暂时不支持此功能'}) data = devInfo['data'][16::] leftTime = int(data[4:8], 16) if data[8:12] == 'FFFF': power = 0 else: power = int(data[8:12], 16) / 10.0 data = {'port': line, 'power': power} # 电量计费模式 if not self._device.get('otherConf', dict()).get('consumeModule', 0): data.update({'leftTime': leftTime}) else: data.update({'leftElec': leftTime / 100.0}) return data # 访问设备电流 def get_port_elec_from_dev(self): devInfo = MessageSender.send(self.device, DeviceCmdCode.OPERATE_DEV_SYNC, {'IMEI': self._device['devNo'], 'funCode': '21', 'data': '00'}) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试。也可能是您的设备版本过低，暂时不支持此功能'}) portData = devInfo['data'][18::] port1 = int(portData[2:4], 16) port2 = int(portData[4:6], 16) port3 = int(portData[6:8], 16) port4 = int(portData[8:10], 16) port5 = int(portData[10:12], 16) port6 = int(portData[12:14], 16) port7 = int(portData[14:16], 16) port8 = int(portData[16:18], 16) port9 = int(portData[18:20], 16) port10 = int(portData[20:22], 16) device = int(portData[22:24], 16) return { 'port1': port1, 'port2': port2, 'port3': port3, 'port4': port4, 'port5': port5, 'port6': port6, 'port7': port7, 'port8': port8, 'port9': port9, 'port10': port10, 'device': device, } # 访问设备 def get_port_temperature_from_dev(self): devInfo = MessageSender.send(self.device, DeviceCmdCode.OPERATE_DEV_SYNC, {'IMEI': self._device['devNo'], 'funCode': '22', 'data': '00'}) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试。也可能是您的设备版本过低，暂时不支持此功能'}) portData = devInfo['data'][18::] port1 = int(portData[2:4], 16) port2 = int(portData[4:6], 16) port3 = int(portData[6:8], 16) port4 = int(portData[8:10], 16) port5 = int(portData[10:12], 16) port6 = int(portData[12:14], 16) port7 = int(portData[14:16], 16) port8 = int(portData[16:18], 16) port9 = int(portData[18:20], 16) port10 = int(portData[20:22], 16) device = int(portData[22:24], 16) return { 'port1': port1, 'port2': port2, 'port3': port3, 'port4': port4, 'port5': port5, 'port6': port6, 'port7': port7, 'port8': port8, 'port9': port9, 'port10': port10, 'device': device, } # 访问设备，获取设备端口信息 def get_port_status_from_dev(self): devInfo = MessageSender.send(device = self.device, cmd = DeviceCmdCode.PASSTHROUGH_OPERATE_DEV_SYNC, payload = { 'IMEI': self._device['devNo'], 'funCode': '01', 'data': 'EE0901{}'.format(make_six_bytes_session_id()) + '00' }, timeout = MQTT_TIMEOUT.CHECK_DEVICE_STATUS) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试', 'rst': -1}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试。也可能是您的设备版本过低，暂时不支持此功能', 'rst': 1}) data = devInfo['data'][16::] result = {} portNum = int(data[2:4], 16) portData = data[4::] ii = 0 while ii < portNum: statusTemp = portData[ii * 2:ii * 2 + 2] if statusTemp == '01': status = {'status': Const.DEV_WORK_STATUS_IDLE} elif statusTemp == '02': status = {'status': Const.DEV_WORK_STATUS_WORKING} elif statusTemp == '03': status = {'status': Const.DEV_WORK_STATUS_FORBIDDEN} elif statusTemp == '04': status = {'status': Const.DEV_WORK_STATUS_FAULT} # 不再上述状态之列的 统一为故障状态 else: status = {'status': Const.DEV_WORK_STATUS_FAULT} ii += 1 result[str(ii)] = status allPorts, usedPorts, usePorts = self.get_port_static_info(result) # 这里存在多线程更新缓存的场景，可能性比较低，但是必须先取出来，然后逐个更新状态，然后再记录缓存 ctrInfo = Device.get_dev_control_cache(self._device['devNo']) for strPort, info in result.items(): if ctrInfo.has_key(strPort): ctrInfo[strPort].update({'status': info['status']}) else: ctrInfo[strPort] = info ctrInfo.update({ 'allPorts': allPorts, 'usedPorts': usedPorts, 'usePorts': usePorts }) Device.update_dev_control_cache(self.device.devNo, ctrInfo) return result def get_default_port_nums(self): default_num = 10 if self.device.devTypeCode == Const.DEVICE_TYPE_CODE_CHARGING_DIANCHUAN_HIGH: default_num = 2 return default_num def get_port_status(self, force = False): if force: return self.get_port_status_from_dev() ctrInfo = Device.get_dev_control_cache(self.device.devNo) if 'allPorts' in ctrInfo and ctrInfo['allPorts'] > 0: allPorts = ctrInfo['allPorts'] else: allPorts = self.get_default_port_nums() statusDict = {} for ii in range(allPorts): tempDict = ctrInfo.get(str(ii + 1), {}) if tempDict.has_key('status'): statusDict[str(ii + 1)] = {'status': tempDict.get('status')} elif tempDict.has_key('isStart'): if tempDict['isStart']: statusDict[str(ii + 1)] = {'status': Const.DEV_WORK_STATUS_WORKING} else: statusDict[str(ii + 1)] = {'status': Const.DEV_WORK_STATUS_IDLE} else: statusDict[str(ii + 1)] = {'status': Const.DEV_WORK_STATUS_IDLE} return statusDict def lock_unlock_port(self, port, lock = True): lockStr = '00' if lock else '01' portStr = fill_2_hexByte(hex(int(port)), 2) devInfo = MessageSender.send(device = self.device, cmd = DeviceCmdCode.OPERATE_DEV_SYNC, payload = {'IMEI': self._device['devNo'], 'funCode': '0A', 'data': portStr + lockStr}, timeout = MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'端口禁用功能只有带保险丝版本的才有。可能是您的设备版本过低，暂时不支持此功能，也可能是设备繁忙无响应。'}) data = devInfo['data'][18::] if data[0:2] == '01': # 表示成功 pass else: raise ServiceException({'result': 2, 'description': u'操作端口失败，请重试看能否解决'}) if lock: Device.update_dev_control_cache(self._device['devNo'], {str(port): {'status': Const.DEV_WORK_STATUS_FORBIDDEN}}) else: Device.update_dev_control_cache(self._device['devNo'], {str(port): {'status': Const.DEV_WORK_STATUS_IDLE}}) def active_deactive_port(self, port, active): if active: raise ServiceException({'result': 2, 'description': u'该设备不支持直接打开端口'}) self.stop_charging_port(port) devInfo = Device.get_dev_control_cache(self._device['devNo']) portCtrInfo = devInfo.get(str(port), {}) portCtrInfo.update({'isStart': False, 'status': Const.DEV_WORK_STATUS_IDLE, 'needTime': 0, 'leftTime': 0, 'endTime': datetime.datetime.now().strftime(Const.DATETIME_FMT)}) newValue = {str(port): portCtrInfo} Device.update_dev_control_cache(self._device['devNo'], newValue) def stop_charging_port(self, port): portStr = fill_2_hexByte(hex(int(port)), 2) devInfo = MessageSender.send(device = self.device, cmd = DeviceCmdCode.OPERATE_DEV_SYNC, payload = {'IMEI': self._device['devNo'], 'funCode': '0B', 'data': portStr}, timeout = MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试。也可能是您的设备版本过低，暂时不支持此功能'}) data = devInfo['data'][16::] port = int(data[2:4], 16) leftTime = int(data[4:8], 16) data = {'port': port} # 电量计费模式 if not self._device.get('otherConf', dict()).get('consumeModule', 0): data.update({'remainder_time': leftTime}) else: data.update({'remainder_time': leftTime / 100.0}) return data def stop(self, port = None): return self.stop_charging_port(port) @property def isHaveStopEvent(self): return True # 获取IC卡、投币、最大功率设置 def get_IC_coin_power_config(self): devInfo = MessageSender.send(device = self.device, cmd = DeviceCmdCode.OPERATE_DEV_SYNC, payload = {'IMEI': self._device['devNo'], 'funCode': '0C', 'data': '00'}, timeout = MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试。也可能是您的设备版本过低，暂时不支持此功能'}) confData = devInfo['data'][18::] maxPower = int(confData[0:4], 16) icMoney = int(confData[4:6], 16) if len(confData) > 6: time1 = int(confData[6:10], 16) time2 = int(confData[10:14], 16) time3 = int(confData[14:18], 16) else: time1, time2, time3 = 0, 0, 0 return {'maxPower': maxPower, 'icMoney': icMoney, 'time1': time1, 'time2': time2, 'time3': time3} def set_IC_coin_power_config(self, infoDict): consumeModule = infoDict['consumeModule'] if consumeModule == 0: time1 = int(infoDict['time1']) time2 = int(infoDict['time2']) time3 = int(infoDict['time3']) else: time1 = int(infoDict['time1'] * 100) time2 = int(infoDict['time2'] * 100) time3 = int(infoDict['time3'] * 100) data = '' data += fill_2_hexByte(hex(int(infoDict['maxPower'])), 4) data += fill_2_hexByte(hex(int(infoDict['icMoney'])), 2) data += fill_2_hexByte(hex(time1), 4) data += fill_2_hexByte(hex(time2), 4) data += fill_2_hexByte(hex(time3), 4) devInfo = MessageSender.send(device = self.device, cmd = DeviceCmdCode.OPERATE_DEV_SYNC, payload = {'IMEI': self._device['devNo'], 'funCode': '08', 'data': data}, timeout = MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试'}) def get_coin_card_enable(self): devs = Device.get_collection().find({'devNo': self._device['devNo']}) if devs.count == 0: raise ServiceException( {'result': 2, 'description': u'没有找到设备哦'}) return {'putCoins': devs[0].get('otherConf', {}).get('putCoins', False), 'icCard': devs[0].get('otherConf', {}).get('icCard', False)} def set_coin_card_enable(self, infoDict): data = '' if infoDict['putCoins']: data += '01' else: data += '00' if infoDict['icCard']: data += '01' else: data += '00' devInfo = MessageSender.send(device = self.device, cmd = DeviceCmdCode.OPERATE_DEV_SYNC, payload = {'IMEI': self._device['devNo'], 'funCode': '09', 'data': data}, timeout = MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试。也可能是您的设备版本过低，暂时不支持此功能'}) try: Device.get_collection().update_one({'devNo': self._device['devNo']}, {'$set': {'otherConf.putCoins': infoDict['putCoins'], 'otherConf.icCard': infoDict['icCard']}}) except Exception, e: logger.error('update dev=%s coin enable ic enable e=%s' % (self._device['devNo'], e)) def get_dev_all_settings(self): """ 电川PCB- DC_Crg_10L_C4.0及以上版本 支持全部参数一起查询 多参数消费流程 消费方式 :return: """ result = MessageSender.send(device = self.device, cmd = DeviceCmdCode.OPERATE_DEV_SYNC, payload = { 'IMEI': self._device['devNo'], 'data': '00', 'funCode': '36' }, timeout = MQTT_TIMEOUT.SHORT) rst = result.get('rst') if rst == -1: raise ServiceException({'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif rst == 1: raise ServiceException({'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试。也可能是您的设备版本过低，暂时不支持此功能'}) elif rst == 0: data = split_str(result.get('data'), lens = '4444444242424224442222', startIndex = 18, toInt = True) consumeModule = data[21] if consumeModule == 0: time1 = data[0] time2 = data[1] time3 = data[2] card1Time = data[3] card2Time = data[4] card3Time = data[4] else: time1 = round(int(data[0]) * 0.01,2) time2 = round(int(data[1]) * 0.01,2) time3 = round(int(data[2]) * 0.01,2) card1Time = round(int(data[3]) * 0.01,2) card2Time = round(int(data[4]) * 0.01,2) card3Time = round(int(data[5]) * 0.01,2) resultDict = { 'time1': time1, 'time2': time2, 'time3': time3, 'card1Time': card1Time, 'card2Time': card2Time, 'card3Time': card3Time, 'icMoney': data[6], # 前台单位为角 'cardRefund': bool(data[7]), # 'power1': data[8], # 'power1ratio': data[9], # 'power2': data[10], # 'power2ratio': data[11], # 'power3': data[12], 'NC': data[13], 'autoStop': bool(data[14]), 'fuchongPower': data[15] * 0.1, 'fuchongTime': data[16], 'noPowerTime': data[17], 'chargeFree': bool(data[18]), 'volume': data[19], # 'consumeProcess': data[20], 'consumeModule': data[21] } else: raise ServiceException({'result': 2, 'description': u'数据读取失败，请您稍后再试'}) oldGetSettingsData = self.get_IC_coin_power_config() resultDict['icMoney'] = oldGetSettingsData.get('icMoney') resultDict['maxPower'] = oldGetSettingsData.get('maxPower') coinCardEnable = self.get_coin_card_enable() resultDict.update(coinCardEnable) try: mcuVersion = self.get_mcu_version() resultDict.update(mcuVersion) except Exception: pass try: powers = self.get_gear_conf() resultDict.update(powers) except Exception: pass if resultDict.get('power5'): resultDict['maxPower'] = resultDict['power5'] return resultDict # 获取设备配置参数 def get_dev_setting(self): driverCode = self._device.get('devType', dict()).get('code', '') dev = Device.objects.get(devNo = self._device['devNo']) # type: Device if driverCode == '100272': resultDict = self.get_dev_all_settings() else: resultDict = {} try: tempDict = self.get_IC_coin_power_config() resultDict.update(tempDict) except Exception: pass try: tempDict = self.get_coin_card_enable() resultDict.update(tempDict) except Exception: pass try: tempDict = self.get_gear_conf() resultDict.update(tempDict) except Exception: pass try: tempDict = self.get_fullstop_cardrefund() resultDict.update(tempDict) except Exception: pass try: mcuVersion = self.get_mcu_version() resultDict.update(mcuVersion) except Exception: pass # 兼容刷卡时间 2a指令 try: tempDict = self.get_freemode_volume_andsoon_config() resultDict.update(tempDict) except Exception: pass refundProtection = dev.otherConf.get('refundProtection', 0) resultDict.update({'refundProtection': refundProtection}) refundProtectionTime = dev.otherConf.get('refundProtectionTime', 5) resultDict.update({'refundProtectionTime': refundProtectionTime}) cardNoRangeStart = dev.otherConf.get('cardNoRangeStart', '') resultDict.update({'cardNoRangeStart': cardNoRangeStart}) cardNoRangeEnd = dev.otherConf.get('cardNoRangeEnd', '') resultDict.update({'cardNoRangeEnd': cardNoRangeEnd}) tempDict = self.get_temperature_voltage_threshold() resultDict.update(tempDict) return resultDict # 获取设备配置参数 def set_dev_setting(self, setConf): keys = setConf.keys() if 'putCoins' in keys or 'icCard' in keys: self.set_coin_card_enable(setConf) if 'maxPower' in keys or 'icMoney' in keys or 'time1' in keys or 'time2' in keys or 'time3' in keys: self.set_IC_coin_power_config(setConf) def get_IC_card_password(self): devInfo = MessageSender.send(device = self.device, cmd = DeviceCmdCode.OPERATE_DEV_SYNC, payload = {'IMEI': self._device['devNo'], 'funCode': '1A', 'data': '00'}, timeout = MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试。也可能是您的设备版本过低，暂时不支持此功能'}) confData = devInfo['data'][18::] result = confData[0:2] if result == '00': cardPassword = '' else: cardPassword = str(int(confData[2:12])) return {'cardPassword': cardPassword} def get_fullstop_cardrefund(self): devInfo = MessageSender.send(device = self.device, cmd = DeviceCmdCode.OPERATE_DEV_SYNC, payload = {'IMEI': self._device['devNo'], 'funCode': '0C', 'data': '00'}, timeout = MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试。也可能是您的设备版本过低，暂时不支持此功能'}) confData = devInfo['data'][18::] maxPower = int(confData[0:4], 16) icMoney = int(confData[4:6], 16) if len(confData) > 6: time1 = int(confData[6:10], 16) time2 = int(confData[10:14], 16) time3 = int(confData[14:18], 16) else: time1, time2, time3 = 0, 0, 0 return {'autoStop': True if confData[20:22] == u'01' else False, 'cardRefund': True if confData[18:20] == u'01' else False} def set_fullstop_cardrefund(self, infoDict): data = '' if infoDict['autoStop']: data += '01' else: data += '00' if infoDict['cardRefund']: data += '01' else: data += '00' devInfo = MessageSender.send(device = self.device, cmd = DeviceCmdCode.OPERATE_DEV_SYNC, payload = {'IMEI': self._device['devNo'], 'funCode': '13', 'data': data}, timeout = MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试。也可能是您的设备版本过低，暂时不支持此功能'}) try: conf = Device.objects.get(devNo = self._device['devNo']).otherConf conf.update({'autoStop': infoDict['autoStop'], 'cardRefund': infoDict['cardRefund']}) Device.get_collection().update({'devNo': self._device['devNo']}, {'$set': {'otherConf': conf}}) except Exception, e: logger.error('update dev=%s coin enable ic enable e=%s' % (self._device['devNo'], e)) def get_gear_conf(self): resultDict = {'power1': 0, 'power1ratio': 0, 'power2': 0, 'power2ratio': 0, 'power3': 0, 'power3ratio': 0} devInfo = MessageSender.send(device = self.device, cmd = DeviceCmdCode.OPERATE_DEV_SYNC, payload = {'IMEI': self._device['devNo'], 'funCode': '15', 'data': '00'}, timeout = MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: return resultDict confData = devInfo['data'][18::] power1 = int(confData[0:4], 16) power1ratio = int(confData[4:6], 16) power2 = int(confData[6:10], 16) power2ratio = int(confData[10:12], 16) power3 = int(confData[12:16], 16) power3ratio = int(confData[16:18], 16) power4 = int(confData[18:22], 16) power4ratio = int(confData[22:24], 16) power5 = int(confData[24:28], 16) power5ratio = int(confData[28:30], 16) result = { 'power1': power1, 'power1ratio': power1ratio, 'power2': power2, 'power2ratio': power2ratio, 'power3': power3, 'power3ratio': power3ratio, 'power4': power4, 'power4ratio': power4ratio, 'power5': power5, 'power5ratio': power5ratio } return result def set_gear_conf(self, infoDict): data = '' data += fill_2_hexByte(hex(int(infoDict['power1'])), 4) data += fill_2_hexByte(hex(int(infoDict['power1ratio'])), 2) data += fill_2_hexByte(hex(int(infoDict['power2'])), 4) data += fill_2_hexByte(hex(int(infoDict['power2ratio'])), 2) data += fill_2_hexByte(hex(int(infoDict['power3'])), 4) data += fill_2_hexByte(hex(int(infoDict['power3ratio'])), 2) data += fill_2_hexByte(hex(int(infoDict['power4'])), 4) data += fill_2_hexByte(hex(int(infoDict['power4ratio'])), 2) data += fill_2_hexByte(hex(int(infoDict['power5'])), 4) data += fill_2_hexByte(hex(int(infoDict['power5ratio'])), 2) devInfo = MessageSender.send(device = self.device, cmd = DeviceCmdCode.OPERATE_DEV_SYNC, payload = {'IMEI': self._device['devNo'], 'funCode': '14', 'data': data}, timeout = MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试。也可能是您的设备版本过低，暂时不支持此功能'}) def recharge_ic_card_realiable(self, cardNo, money, order_no): # type:(str,RMB,str)->dict data = 'EE1012{}'.format(make_six_bytes_session_id()) cardNo = fill_2_hexByte(hex(int(cardNo)), 8) data += cardNo + fill_2_hexByte(hex(int(money * 10)), 4) + '0001' payload = { 'IMEI': self.device.devNo, 'data': data, 'funCode': '12', 'order_id': order_no, 'order_type': 'ic_recharge' } MessageSender.send_no_wait(device = self.device, cmd = DeviceCmdCode.PASSTHROUGH_OPERATE_DEV_SYNC, payload = payload) # 给实体卡充值 def recharge_card(self, cardNo, money, orderNo = None): # type:(str,RMB)->(dict, RMB) try: data = 'EE1012{}'.format(make_six_bytes_session_id()) cardNo = fill_2_hexByte(hex(int(cardNo)), 8) data += cardNo + fill_2_hexByte(hex(int(money * 10)), 4) + '0001' devInfo = MessageSender.send(device = self.device, cmd = DeviceCmdCode.PASSTHROUGH_OPERATE_DEV_SYNC, payload = {'IMEI': self._device['devNo'], 'data': data, 'funCode': '12'}, timeout = MQTT_TIMEOUT.LONGEST) if devInfo['rst'] != 0: if devInfo['rst'] == ErrorCode.DEVICE_CONN_FAIL: # 离线无法判断是否成功, 认为充值成功, 走售后解决 return { 'result': ErrorCode.DEVICE_CONN_FAIL, 'description': u'当前充电桩正在玩命找网络,请您稍候再试' }, None elif devInfo['rst'] == ErrorCode.BOARD_UART_TIMEOUT: return { 'result': ErrorCode.BOARD_UART_TIMEOUT, 'description': u'当前充电桩忙,无响应,请您稍候再试' }, None else: return { 'result': devInfo['rst'], 'description': u'系统异常' }, None resultData = devInfo['data'] if resultData[4:6] != '16': return { 'result': ErrorCode.PARAMETER_ERROR_TO_BOX, 'description': u'充值返回报文命令码不为16' }, None balance = RMB(int(resultData[26:30], 16)) * Decimal('0.1') result = True if resultData[34:36] == '01' else False if result: return { 'result': ErrorCode.SUCCESS, 'description': '' }, balance else: return { 'result': ErrorCode.IC_RECHARGE_FAIL, 'description': u'充值失败' }, balance except Exception as e: logger.exception(e) return { 'result': ErrorCode.EXCEPTION, 'description': e.message }, None # 获取IC卡、投币、最大功率设置 def get_freemode_volume_andsoon_config(self): devInfo = MessageSender.send(device = self.device, cmd = DeviceCmdCode.OPERATE_DEV_SYNC, payload = {'IMEI': self._device['devNo'], 'funCode': '2A', 'data': '00'}, timeout = MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试。也可能是您的设备版本过低，暂时不支持此功能'}) confData = devInfo['data'][18::] card1Time = int(confData[0:4], 16) card2Time = int(confData[4:8], 16) card3Time = int(confData[8:12], 16) chargeFree = True if confData[12:14] == '01' else False volume = int(confData[14:16], 16) fuchongPower = int(confData[16:20], 16) * 0.1 fuchongTime = int(confData[20:24], 16) return {'card1Time': card1Time, 'card2Time': card2Time, 'card3Time': card3Time, 'chargeFree': chargeFree, 'volume': volume, 'fuchongPower': fuchongPower, 'fuchongTime': fuchongTime} def get_mcu_version(self): devInfo = MessageSender.send(device = self.device, cmd = DeviceCmdCode.OPERATE_DEV_SYNC, payload = {'IMEI': self._device['devNo'], 'funCode': '25', 'data': '00'}, timeout = MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试。也可能是您的设备版本过低，暂时不支持此功能'}) confData = devInfo['data'][18::] mcuVersion = int(confData[0:4], 16) return {'mcuVersion': mcuVersion} def set_freemode_volume_config(self, infoDict): data = '01' if infoDict['chargeFree'] else '00' data += fill_2_hexByte(hex(int(infoDict.get('volume', 5))), 2) devInfo = MessageSender.send(device = self.device, cmd = self.make_random_cmdcode(), payload = {'IMEI': self._device['devNo'], 'funCode': '27', 'data': data}, timeout = MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试'}) def set_fuchong_config(self, infoDict): data = fill_2_hexByte(hex(int(infoDict['fuchongPower']) * 10), 4) data += fill_2_hexByte(hex(int(infoDict['fuchongTime'])), 4) devInfo = MessageSender.send(device = self.device, cmd = DeviceCmdCode.OPERATE_DEV_SYNC, payload = {'IMEI': self._device['devNo'], 'funCode': '28', 'data': data}, timeout = MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试'}) dev = Device.objects.get(devNo = self._device['devNo']) dev.otherConf.update({'fuchongPower': int(infoDict['fuchongPower'])}) dev.otherConf.update({'fuchongTime': int(infoDict['fuchongTime'])}) dev.save() def set_card_time_config(self, infoDict): consumeModule = infoDict['consumeModule'] if consumeModule == 0: card1Time = int(infoDict['card1Time']) card2Time = int(infoDict['card2Time']) card3Time = int(infoDict['card3Time']) else: card1Time = int(infoDict['card1Time'] * 100) card2Time = int(infoDict['card2Time'] * 100) card3Time = int(infoDict['card3Time'] * 100) data = fill_2_hexByte(hex(card1Time), 4) data += fill_2_hexByte(hex(card2Time), 4) data += fill_2_hexByte(hex(card3Time), 4) devInfo = MessageSender.send(device = self.device, cmd = self.make_random_cmdcode(), payload = {'IMEI': self._device['devNo'], 'funCode': '29', 'data': data}, timeout = MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试'}) def set_IC_card_password(self, infoDict): passwordStr = str(infoDict['cardPassword']) if len(passwordStr) < 6 or len(passwordStr) > 12: raise ServiceException({'result': 2, 'description': u'密码长度不合法, 请重新设置'}) data = passwordStr.rjust(12, '0') devInfo = MessageSender.send(device = self.device, cmd = DeviceCmdCode.OPERATE_DEV_SYNC, payload = {'IMEI': self._device['devNo'], 'funCode': '18', 'data': data}, timeout = MQTT_TIMEOUT.SHORT) def set_IC_card_range(self, infoDict): cardNoRangeStart = str(infoDict['cardNoRangeStart']) cardNoRangeEnd = str(infoDict['cardNoRangeEnd']) if int(cardNoRangeStart) > 4294967295 or int(cardNoRangeEnd) > 4294967295 or int(cardNoRangeStart) > int( cardNoRangeEnd): raise ServiceException({'result': 2, 'description': u'卡号设置不合法, 请重新设置'}) cardNoRangeStart = cardNoRangeStart.rjust(10, '0') cardNoRangeEnd = cardNoRangeEnd.rjust(10, '0') data = cardNoRangeStart + cardNoRangeEnd devInfo = MessageSender.send(device = self.device, cmd = DeviceCmdCode.OPERATE_DEV_SYNC, payload = {'IMEI': self._device['devNo'], 'funCode': '19', 'data': data}, timeout = MQTT_TIMEOUT.SHORT) dev = Device.objects.get(devNo = self._device['devNo']) dev.otherConf.update({'cardNoRangeStart': str(infoDict['cardNoRangeStart'])}) dev.otherConf.update({'cardNoRangeEnd': str(infoDict['cardNoRangeEnd'])}) dev.save() def set_no_power_time(self, infoDict): """ 指令是0x37 可能是 双路大功率独有的 需要找主板厂家确认一下 设置充电器移除时间 相当于负载检测 5-999秒 设置浮充功率 进入浮充时间的最低功率 单位0.1w 0-99.9w 设置浮充时间 进入浮充之后 的充电时间 120-999秒 :param infoDict: :return: """ fuchongPower = infoDict['fuchongPower'] fuchongTime = infoDict['fuchongTime'] noPowerTime = infoDict['noPowerTime'] if fuchongPower > 99.9: raise ServiceException({'result': 2, 'description': u'浮充功率设置范围为0-99.9w'}) if fuchongTime > 999 or fuchongTime < 100: raise ServiceException({'result': 2, 'description': u'浮充时间设置范围为120-999秒'}) if noPowerTime > 999 or noPowerTime < 5: raise ServiceException({'result': 2, 'decription': u'充电器移除时间设置范围为5-999秒'}) result = MessageSender.send( device=self.device, cmd=DeviceCmdCode.OPERATE_DEV_SYNC, payload={ 'IMEI': self.device.devNo, 'funCode': '37', 'data': '{:0>4X}{:0>4X}{:0>4X}'.format(int(fuchongPower*10), int(fuchongTime), int(noPowerTime)) } ) if result.get('rst') == -1: raise ServiceException({'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif result.get('rst') == 1: raise ServiceException({'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试'}) else: if result['data'][18:20] != '01': raise ServiceException({'result': 2, 'description': u'设置失败，请您稍后再试'}) def set_device_function(self, request, lastSetConf): if request.POST.has_key('putCoins'): # putCoins = True if request.POST.get('putCoins') == 'true' else False putCoins = request.POST.get('putCoins', False) lastSetConf.update({'putCoins': putCoins}) self.set_coin_card_enable(lastSetConf) if request.POST.has_key('icCard'): # icCard = True if request.POST.get('icCard') == 'true' else False icCard = request.POST.get('icCard', False) lastSetConf.update({'icCard': icCard}) self.set_coin_card_enable(lastSetConf) if request.POST.has_key('autoStop'): # autoStop = True if request.POST.get('autoStop') == 'true' else False autoStop = request.POST.get('autoStop', False) lastSetConf.update({'autoStop': autoStop}) self.set_fullstop_cardrefund(lastSetConf) if request.POST.has_key('cardRefund'): # cardRefund = True if request.POST.get('cardRefund') == 'true' else False cardRefund = request.POST.get('cardRefund', False) lastSetConf.update({'cardRefund': cardRefund}) self.set_fullstop_cardrefund(lastSetConf) if request.POST.has_key('chargeFree'): # chargeFree = True if request.POST.get('chargeFree') == 'true' else False chargeFree = request.POST.get('chargeFree', False) lastSetConf.update({'chargeFree': chargeFree}) self.set_freemode_volume_config(lastSetConf) def set_device_function_param(self, request, lastSetConf): if request.POST.has_key('icMoney'): lastSetConf.update({'icMoney': int(request.POST.get('icMoney', 0))}) self.set_IC_coin_power_config(lastSetConf) if 'noPowerTime' in request.POST: lastSetConf.update({ 'noPowerTime': int(request.POST['noPowerTime']), 'fuchongPower': int(request.POST['fuchongPower']), 'fuchongTime': int(request.POST['fuchongTime']), }) self.set_no_power_time(lastSetConf) if request.POST.has_key('time1') and request.POST.has_key('time2') and request.POST.has_key('time3'): lastSetConf.update({'time1': float(request.POST.get('time1', 0))}) lastSetConf.update({'time2': float(request.POST.get('time2', 0))}) lastSetConf.update({'time3': float(request.POST.get('time3', 0))}) self.set_IC_coin_power_config(lastSetConf) if request.POST.has_key('elec1') and request.POST.has_key('elec2') and request.POST.has_key('elec3'): lastSetConf.update({'elec1': int(float(request.POST.get('elec1', 0)) * 100 )}) lastSetConf.update({'elec2': int(float(request.POST.get('elec2', 0)) * 100 )}) lastSetConf.update({'elec3': int(float(request.POST.get('elec3', 0)) * 100 )}) self.set_IC_coin_power_config(lastSetConf) if request.POST.has_key('power1'): lastSetConf.update({'power1': int(request.POST.get('power1', 0))}) lastSetConf.update({'power2': int(request.POST.get('power2', 0))}) lastSetConf.update({'power3': int(request.POST.get('power3', 0))}) lastSetConf.update({'power4': int(request.POST.get('power4', 0))}) lastSetConf.update({'power5': int(request.POST.get('power5', 0))}) self.set_gear_conf(lastSetConf) if request.POST.has_key('power1ratio'): lastSetConf.update({'power1ratio': int(request.POST.get('power1ratio', 0))}) lastSetConf.update({'power2ratio': int(request.POST.get('power2ratio', 0))}) lastSetConf.update({'power3ratio': int(request.POST.get('power3ratio', 0))}) lastSetConf.update({'power4ratio': int(request.POST.get('power4ratio', 0))}) lastSetConf.update({'power5ratio': int(request.POST.get('power5ratio', 0))}) self.set_gear_conf(lastSetConf) if request.POST.has_key('card1Time') and request.POST.has_key('card2Time') and request.POST.has_key( 'card3Time'): lastSetConf.update({'card1Time': float(request.POST.get('card1Time', 0))}) lastSetConf.update({'card2Time': float(request.POST.get('card2Time', 0))}) lastSetConf.update({'card3Time': float(request.POST.get('card3Time', 0))}) self.set_card_time_config(lastSetConf) if 'fuchongPower' in request.POST and 'fuchongTime' in request.POST: lastSetConf.update({'fuchongPower': int(request.POST.get('fuchongPower', 0))}) lastSetConf.update({'fuchongTime': int(request.POST.get('fuchongTime', 0))}) self.set_fuchong_config(lastSetConf) if 'consumeProcess' in request.POST or 'consumeModule' in request.POST: lastSetConf.update({'consumeProcess': request.POST.get('consumeProcess', '0')}) lastSetConf.update({'consumeModule': request.POST.get('consumeModule', '0')}) self.set_consume_module(lastSetConf) if request.POST.has_key('refundProtectionTime'): lastSetConf.update({'refundProtectionTime': int(request.POST.get('refundProtectionTime', 5))}) dev = Device.objects.get(devNo = self._device['devNo']) dev.otherConf.update({'refundProtectionTime': lastSetConf['refundProtectionTime']}) dev.save() if request.POST.has_key('volume'): if request.POST.get('volume') != lastSetConf['volume']: lastSetConf.update({'volume': int(request.POST.get('volume', 0))}) self.set_freemode_volume_config(lastSetConf) def response_card_status(self, cardNo, balance, status): data = 'EE1123{}'.format(make_six_bytes_session_id()) + fill_2_hexByte(hex(int(cardNo)), 4) + fill_2_hexByte( hex(int(balance * 10)), 4) + 'AA33' + status devInfo = MessageSender.send(self.device, DeviceCmdCode.PASSTHROUGH_OPERATE_DEV_SYNC, {'IMEI': self._device['devNo'], 'funCode': '22', 'data': data}) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: # 等于1的时候，说明服务器和远程模块通讯OK，响应已经收到，不需要异常处理 raise ServiceException( {'result': 2, 'description': u'充电桩没有响应，可能是版本不对或者串口接线不良'}) resultData = devInfo['data'] if resultData[4:6] != '23': return {'status': '00'} backCardNo = int(resultData[18:26], 16) if backCardNo != int(cardNo): return {'status': '00'} return {'status': resultData[26:28]} def set_consume_module(self, infoDict): """ 设置消费模式以及消费流程 包含两个参数 consumeProcess 消费流程 consumeModule 消费方式 :param infoDict: :return: """ consumeProcess = infoDict.get('consumeProcess', 0) consumeModule = infoDict.get('consumeModule', 0) consumeProcessHex = fill_2_hexByte(hex(int(consumeProcess)), 2) consumeModuleHex = fill_2_hexByte(hex(int(consumeModule)), 2) result = MessageSender.send(device = self.device, cmd = DeviceCmdCode.OPERATE_DEV_SYNC, payload = { 'IMEI': self._device['devNo'], 'funCode': '38', 'data': consumeProcessHex + consumeModuleHex }, timeout = MQTT_TIMEOUT.SHORT) rst = result.get('rst') data = result.get('data') if rst == 0 and data[-4:-2] == '01': # OtherConf中也保留一份 方便启动的时候随时查询 Device.get_collection().update_one({'devNo': self.device.devNo}, { '$set': {'otherConf.consumeProcess': int(consumeProcess), 'otherConf.consumeModule': int(consumeModule), }}) Device.invalid_device_cache(self._device['devNo']) return elif data[-4: -2] != '01': raise ServiceException({'result': 2, 'description': u'设置失败，请重新试试'}) elif rst == -1: raise ServiceException({'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif rst == 1: raise ServiceException({'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试'}) else: raise ServiceException({'result': 2, 'description': u'未知错误'}) def get_temperature_voltage_threshold(self): devObj = Device.objects.get(devNo = self._device['devNo']) return {'temThre': devObj.otherConf.get('temThre', 230), 'voltageThre': devObj.otherConf.get('voltageThre', 60)} def set_temperature_voltage_threshold(self, infoDict): data = '' data += fill_2_hexByte(hex(int(infoDict['temThre'])), 2) data += fill_2_hexByte(hex(int(infoDict['voltageThre'])), 4) devInfo = MessageSender.send(device = self.device, cmd = DeviceCmdCode.OPERATE_DEV_SYNC, payload = {'IMEI': self._device['devNo'], 'funCode': 'AA', 'data': data}, timeout = MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试'}) devObj = Device.objects.get(devNo = self._device['devNo']) devObj.otherConf['temThre'] = int(infoDict['temThre']) devObj.otherConf['voltageThre'] = int(infoDict['voltageThre']) devObj.save() def get_dev_all_info_by_24(self): """ 24指令 获取 总电流[2B]+箱体温度[1B]+输出回路继电器状态[2B]+输出回路功率[20B]+剩余充电时间[20B] """ devInfo = MessageSender.send(device=self.device, cmd=DeviceCmdCode.OPERATE_DEV_SYNC, payload={'IMEI': self._device['devNo'], 'funCode': '24', 'data': '00'}, timeout=MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试'}) data = devInfo['data'] data = data[18:] totalAmpere = round(int(data[0:4], 16) * 0.1, 2) boxTemperature = round(int(data[4:6], 16), 2) if data[4:6] == 'FF': boxTemperature = None relayStatus ='{:0<10b}'.format(int(data[6:10], 16)) powers = [data[10 + item: 14 + item] for item in xrange(0, 40, 4)] leftTimes = [data[50 + item: 54 + item] for item in xrange(0, 40, 4)] portInfo = {} for i in xrange(0, 10): portInfo[str(i + 1)] = { 'status': round(int(relayStatus[i], 16), 2), 'power': round(int(powers[i], 16), 2), 'leftTime': round(int(leftTimes[i], 16), 2), } return {'totalAmpere': totalAmpere, 'boxTemperature': boxTemperature, 'portInfo': portInfo} def get_all_port_info_by_34(self, returnType='list'): """ returnType :　list dict """ devInfo = MessageSender.send(self.device, self.make_random_cmdcode(), {'IMEI': self._device['devNo'], 'funCode': '34', 'data': '00'}) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试', 'rst': -1}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试。也可能是您的设备版本过低，暂时不支持此功能', 'rst': 1}) data = devInfo['data'][18:] import re portStatus = map(lambda d: d, re.findall(r'..', data[:20])) portLeftTime = map(lambda d: int(d, 16), re.findall(r'....', data[20:60])) portPower = map(lambda d: int(d, 16) / 10.0, re.findall(r'....', data[60:100])) portUsedElec = map(lambda d: int(d, 16) / 100.0, re.findall(r'....', data[100:140])) ampere = map(lambda d: int(d, 16) / 10.0, re.findall(r'..', data[140:160])) if returnType == 'list': lis = [] for i, x in enumerate(portStatus): item = { 'index': str(i + 1), 'portStatus': str(x), 'leftTime': str(portLeftTime[i]), 'power': str(portPower[i]), 'usedElec': str(portUsedElec[i]), 'ampere': str(ampere[i]), } lis.append(item) return lis if returnType == 'dict': lis = [] for i, x in enumerate(portStatus): item = (str(i + 1), { 'index': str(i + 1), 'portStatus': str(x), 'leftTime': str(portLeftTime[i]), 'power': str(portPower[i]), 'usedElec': str(portUsedElec[i]), 'ampere': str(ampere[i]), }) lis.append(item) result = dict(lis) return result def get_dev_all_info_by_42(self): """ 42指令 获取 总电流[2B]+箱体温度[1B]+输出回路继电器状态[2B]+输出回路功率[20B]+剩余充电时间[20B] """ devInfo = MessageSender.send(device=self.device, cmd=DeviceCmdCode.OPERATE_DEV_SYNC, payload={'IMEI': self._device['devNo'], 'funCode': '42', 'data': '00'}, timeout=MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试'}) data = devInfo['data'] data = data[18:] totalAmpere = round(int(data[0:4], 16) * 0.1, 2) boxTemperature = round(int(data[4:6], 16), 2) if data[4:6] == 'FF': boxTemperature = None relayStatus = '{:0<10b}'.format(int(data[6:12], 16)) powers = [data[12 + item: 16 + item] for item in xrange(0, 96, 4)] leftTimes = [data[108 + item: 112 + item] for item in xrange(0, 96, 4)] portInfo = {} for i in xrange(0, 24): portInfo[str(i + 1)] = { 'status': round(int(relayStatus[i], 16), 2), 'power': round(int(powers[i], 16), 2), 'leftTime': round(int(leftTimes[i], 16), 2), } return {'totalAmpere': totalAmpere, 'boxTemperature': boxTemperature, 'portInfo': portInfo} def get_device_function_code(self): devInfo = MessageSender.send(device=self.device, cmd=DeviceCmdCode.OPERATE_DEV_SYNC, payload={'IMEI': self._device['devNo'], 'funCode': '32', 'data': '00'}, timeout=MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试'}) data = devInfo['data'] return '{:0>40b}'.format(int(data[18:-2], 16)) def switch_bill_as_service(self, onOrOff): super(GaoBoRuiChargingBox, self).switch_bill_as_service(onOrOff) if onOrOff: infoDict = {"consumeProcess": self.device['otherConf'].get("consumeProcess", 0), "consumeModule": 1} self.set_consume_module(infoDict)