# -*- coding: utf-8 -*- # !/usr/bin/env python import datetime import logging import time from decimal import Decimal from apilib.monetary import RMB from apps.web.constant import DeviceCmdCode, Const, ErrorCode, MQTT_TIMEOUT, DeviceErrorCodeDesc from apps.web.core.adapter.base import SmartBox, fill_2_hexByte, make_six_bytes_session_id from apps.web.core.exceptions import ServiceException from apps.web.core.networking import MessageSender from apps.web.device.models import Device, GroupDict logger = logging.getLogger(__name__) class YuZe5Box(SmartBox): def __init__(self, device): super(YuZe5Box, self).__init__(device) def _check_package(self, package): """ 获取设备启动的发送数据 根据设备的当前模式以及套餐获取 :param package: :return: """ consumeMode = self._device.get("otherConf", dict()).get("consumeMode") if not consumeMode: tempDict = self.get_all_dev_settings() consumeMode = tempDict.get('consumeMode') Device.get_collection().update_one({'devNo': self._device['devNo']}, { '$set': {'otherConf.consumeMode': int(consumeMode)}}) Device.invalid_device_cache(self._device['devNo']) unit = package.get("unit", u"分钟") _time = float(package.get("time", 0)) # 按时间计费 或者线下免费模式 if consumeMode == 0 or consumeMode == 2: billingType = "time" if unit == u"小时": _time = _time * 60 elif unit == u"天": _time = _time * 24 * 60 elif unit == u"秒": _time = _time / 60 elif unit == u"分钟": _time = _time else: raise ServiceException({"result": 2, "description": u"套餐单位错误，请联系经销商"}) # 按电量计费 else: billingType = "elec" if unit != u"度": raise ServiceException({"result": 2, "description": u"套餐单位错误，请联系经销商"}) else: _time = _time * 100 return _time, unit, billingType def translate_funcode(self, funCode): funCodeDict = { '01': u'获取端口数量', '02': u'移动支付', '0C': u'获取设备设置', '08': u'设置设备参数', '06': u'获取设备端口详情', '07': u'获取刷卡投币统计数据', '09': u'设置刷卡投币使能', '0A': u'端口使能', '0B': u'端口关闭', '16': u'设置设备参数', '20': u'设备重启', '13': u'设置卡充满退费', '15': u'获取功率费率配置', '14': u'设置功率费率配置', '12': u'充值', '22': u'回复卡充值', } return funCodeDict.get(funCode, '') def translate_event_cmdcode(self, cmdCode): cmdDict = { '03': u'投币上报', '04': u'刷卡上报', '05': u'充电结束', '16': u'充电结束', '10': u'刷卡上报', '0D': u'故障', '20': u'启动设备', '11': u'刷卡使用', '12': u'卡充值', '22': u'ID卡扣费', '23': u'ID卡扣费状态', '17': u'IC卡回收余额成功', '30': u'电流上报', '31': u'温度上报', '32': u'烟感上报', } return cmdDict.get(cmdCode, '') def is_port_can_use(self, port, canAdd = False): # 电川的在启动的时候去判断是否需要续充 return True, '' def check_dev_status(self, attachParas = None): """ 如果超过两个心跳周期没有报心跳,并且最后一次更新时间在2个小时内,需要从设备获取状态 否则以缓存状态为准。 :param attachParas: :return: """ if attachParas is None: raise ServiceException({'result': 0, 'description': u'请您选择合适的充电端口、电池类型信息'}) if not attachParas.has_key('chargeIndex'): raise ServiceException({'result': 0, 'description': u'请您选择合适的充电端口'}) if not self.device.need_fetch_online: raise ServiceException( {'result': 2, 'description': DeviceErrorCodeDesc.get(ErrorCode.DEVICE_CONN_CHECK_FAIL)}) self.get_port_status_from_dev() group = self.device.group # type: GroupDict if group.is_free: logger.debug('{} is free. no need to check continue pay.'.format(repr(self.device))) return # 处理是否能够续充 portDict = self.get_port_status() port = str(attachParas['chargeIndex']) if port in portDict: isCanAdd = self.device['devType'].get('payableWhileBusy', False) if portDict[port]['status'] == Const.DEV_WORK_STATUS_IDLE: return elif portDict[port]['status'] == Const.DEV_WORK_STATUS_FAULT: raise ServiceException({'result': 0, 'description': u'该端口故障，暂时不能使用'}) elif portDict[port]['status'] == Const.DEV_WORK_STATUS_WORKING: if isCanAdd: return else: raise ServiceException({'result': 0, 'description': u'该端口正在工作不能使用，请您使用其他端口'}) elif portDict[port]['status'] == Const.DEV_WORK_STATUS_FORBIDDEN: raise ServiceException({'result': 0, 'description': u'该端口已被禁止使用，请您使用其他端口'}) elif portDict[port]['status'] == Const.DEV_WORK_STATUS_CONNECTED: return else: raise ServiceException({'result': 0, 'description': u'端口状态未知，暂时不能使用'}) else: raise ServiceException({'result': 0, 'description': u'未知端口，暂时不能使用'}) def test(self, coins): hexPort = fill_2_hexByte(hex(int(1)), 2) hexTime = fill_2_hexByte(hex(5)) devInfo = MessageSender.send(device = self.device, cmd = DeviceCmdCode.OPERATE_DEV_SYNC, payload = { 'IMEI': self._device['devNo'], "funCode": '02', 'data': hexPort + '0000' + hexTime }, timeout = MQTT_TIMEOUT.SHORT) return devInfo def port_is_busy(self, port_dict): if not port_dict: return False if 'billingType' not in port_dict: return False if 'status' not in port_dict: return False if 'coins' not in port_dict: return False if 'price' not in port_dict: return False if port_dict['billingType'] not in ['time', 'elec']: return False if port_dict['billingType'] == 'time': if 'needTime' not in port_dict: return False else: if 'needElec' not in port_dict: return False if port_dict['status'] == Const.DEV_WORK_STATUS_WORKING: return True else: return False def start_device(self, package, openId, attachParas): if attachParas is None: raise ServiceException({'result': 2, 'description': u'请您选择合适的充电线路、电池类型信息'}) if not attachParas.has_key('chargeIndex'): raise ServiceException({'result': 2, 'description': u'请您选择合适的充电线路'}) price = float(package['price']) dev = Device.objects.get(devNo = self._device['devNo']) refundProtection = dev.otherConf.get('refundProtection', 0) refundProtectionTime = dev.otherConf.get('refundProtectionTime', 5) port = hex(int(attachParas['chargeIndex'])) hexPort = fill_2_hexByte(port, 2) _time, unit, billingType = self._check_package(package) coins = float(package['coins']) hexTime = fill_2_hexByte(hex(int(_time))) devInfo = MessageSender.send( device = self.device, cmd = DeviceCmdCode.PASSTHROUGH_OPERATE_DEV_SYNC, payload = { 'IMEI': self._device['devNo'], "funCode": '02', 'data': 'EE0D02{}'.format(make_six_bytes_session_id()) + hexPort + '0000' + hexTime }, timeout = MQTT_TIMEOUT.START_DEVICE) usePort = int(attachParas['chargeIndex']) if 'rst' not in devInfo: raise ServiceException( { 'result': 2, 'description': u'启动设备失败，您的支付金额已经退还，请重新扫码设备试试(1001)' }) if devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( { 'result': 2, 'description': u'充电桩正在玩命找网络，您的金币还在，重试不需要重新付款，建议您试试旁边其他设备，或者稍后再试哦' }) elif devInfo['rst'] == 1: self.check_serial_port_for_startcmd(attachParas['chargeIndex']) else: raise ServiceException( { 'result': 2, 'description': u'启动设备失败，您的支付金额已经退回，请重新扫码设备({})'.format(devInfo['rst']) }) else: if 'data' not in devInfo: logger.warning('no data in success response. result = {}'.format(str(devInfo))) raise ServiceException( { 'result': 2, 'description': u'启动设备失败，您的支付金额已经退还，请重试' }) else: data = devInfo['data'][18::] result = data[2:4] if result == '01': # 成功 pass elif result == '02': newValue = {str(usePort): {'status': Const.DEV_WORK_STATUS_FAULT, 'statusInfo': u'充电站故障'}} Device.update_dev_control_cache(self._device['devNo'], newValue) raise ServiceException({'result': 2, 'description': u'充电站故障'}) elif result == '03': newValue = {str(usePort): {'status': Const.DEV_WORK_STATUS_WORKING, 'statusInfo': u''}} Device.update_dev_control_cache(self._device['devNo'], newValue) raise ServiceException({'result': 2, 'description': u'该端口正在使用中'}) else: raise ServiceException({ 'result': 2, 'description': u'启动设备失败({})，您的支付金额已经退回，请重新扫码设备'.format(result) }) portDict = { 'startTime': datetime.datetime.now().strftime('%Y-%m-%d %H:%M:%S'), 'status': Const.DEV_WORK_STATUS_WORKING, 'coins': coins, 'price': price, 'billingType': billingType, 'isStart': True, 'openId': openId, 'refunded': False, 'vCardId': self._vcard_id, 'refundProtection': refundProtection, 'refundProtectionTime': refundProtectionTime } ctrInfo = Device.get_dev_control_cache(self._device.devNo) lastPortInfo = ctrInfo.get(str(usePort), None) if self.port_is_busy(lastPortInfo) and \ lastPortInfo.get('billingType') == billingType and \ lastPortInfo.get('openId') == openId: is_continus = True portDict['coins'] = float(coins) + lastPortInfo['coins'] portDict['price'] = float(price) + lastPortInfo['price'] else: is_continus = False portDict['coins'] = float(coins) portDict['price'] = float(price) if 'linkedRechargeRecordId' in attachParas and attachParas.get('isQuickPay', False): if is_continus: payInfo = lastPortInfo.get("payInfo", list()) if not payInfo: logger.warning("miss payInfo! {}-{}".format(self._device["devNo"], usePort)) else: payInfo = list() payInfo.append({'rechargeRcdId': str(attachParas['linkedRechargeRecordId'])}) portDict['payInfo'] = payInfo if billingType == 'time': if is_continus: portDict['needTime'] = _time + lastPortInfo['needTime'] else: portDict['needTime'] = _time finishedTime = int(time.time()) + int(portDict['needTime'] * 60) else: if is_continus: portDict['needElec'] = _time / 100.0 + lastPortInfo['needElec'] else: portDict['needElec'] = _time / 100.0 finishedTime = int(time.time()) + 60 * 60 * 12 portDict.update({'finishedTime': finishedTime}) if 'orderNo' in attachParas: portDict.update({'orderNo': attachParas['orderNo']}) Device.update_dev_control_cache( self._device['devNo'], { str(usePort): portDict }) devInfo['finishedTime'] = finishedTime return devInfo def analyze_event_data(self, data): cmdCode = data[4:6] if cmdCode == '05': port = int(data[18:20], 16) leftTime = int(data[20:24], 16) reason = data[24:26] if reason == '00': desc = u'购买的充电时间或者电量已经用完' elif reason == '01': desc = u'系统判断为异常断电（插头被拔或者松动，或者电瓶已经充满），电瓶车充电器种类繁多，可能存在误差' elif reason == '02': desc = u'电池已经充满' elif reason == '03': desc = u'设备或者端口故障。建议您根据已经充电的时间评估是否需要到现场换到其他端口充电' elif reason == '04': desc = u'警告！您的电池功率超过本机最大限制。为了公共安全，不建议您在该充电桩充电' elif reason == '05': desc = u'刷卡退费结束' elif reason == '06': desc = u'可能是插头被拔掉或者未连接充电器。如果不是自己操作，建议您到现场检查是否有人误操作' elif reason == '07': desc = u'远程方式停止充电。如果不是自己操作，建议到现场尽快恢复充电' else: desc = u'' # 刷卡充电的结束 if len(data) > 34: cardNo = str(int(data[26:34], 16)) backMoney = int(data[34:36], 16) / 10.0 cardType = 'ID' if data[36:40] == 'AA33' else 'IC' if cardNo != str(0): return {'status': Const.DEV_WORK_STATUS_IDLE, 'cmdCode': cmdCode, 'port': port, 'leftTime': leftTime, 'reason': desc, 'isStart': False, 'cardNo': cardNo, 'backMoney': backMoney, 'cardType': cardType, 'endType': reason, 'reasonCode': reason, 'uartData': data} else: return {'status': Const.DEV_WORK_STATUS_IDLE, 'cmdCode': cmdCode, 'port': port, 'leftTime': leftTime, 'reason': desc, 'isStart': False, 'endType': reason, 'reasonCode': reason, 'uartData': data} # 非刷卡充电的结束 else: return {'status': Const.DEV_WORK_STATUS_IDLE, 'cmdCode': cmdCode, 'port': port, 'leftTime': leftTime, 'reason': desc, 'isStart': False, 'endType': reason, 'reasonCode': reason, 'uartData': data} elif cmdCode == '0D': port = int(data[16:18], 16) errCode = data[18:20] if errCode == '01': return {'statusInfo': u'端口输出故障', 'cmdCode': cmdCode, 'port': port, 'FaultCode': errCode, "uart": data} elif errCode == '02': return {'statusInfo': u'机器整体充电功率过大', 'cmdCode': cmdCode, 'port': port, 'FaultCode': errCode, "uart": data} elif errCode == '03': return {'statusInfo': u'电源故障', 'cmdCode': cmdCode, 'port': port, 'FaultCode': errCode, "uart": data} elif cmdCode == '03': # 投币上报 coin = int(data[18:20], 16) try: port = int(data[20:22], 16) except: port = None return {'cmdCode': cmdCode, 'coins': coin, 'port': port} elif cmdCode == '11': # 刷卡后，按下端口，上报的报文 # cardNo = str(int(''.join(re.findall(r'..', data[18:26])[::-1]), 16)) cardNo = int(data[18:26], 16) cardNo = str(cardNo) fee = int(data[26:28], 16) / 10.0 balance = int(data[28:32], 16) / 10.0 cardType = 'ID' if data[32:36] == 'AA33' else 'IC' port = int(data[36:38], 16) status = data[38:40] return {'cardNo': cardNo, 'fee': fee, 'balance': balance, 'cardType': cardType, 'port': port, 'status': status, 'cmdCode': cmdCode} elif cmdCode == '12': cardNo = data[18:26] cardNo = str(int(cardNo, 16)) balance = int(data[26:30], 16) / 10.0 cardType = 'ID' if data[30:34] == 'AA33' else 'IC' return {'cmdCode': cmdCode, 'balance': balance, 'cardType': cardType, 'cardNo': cardNo} elif cmdCode == '04': # 旧版本的刷卡报文 money = int(data[18:20], 16) return {'cmdCode': cmdCode, 'money': money} elif cmdCode == '30': # 宇泽家的，主动上报电流 portData = data[18:48] port1 = int(portData[2:4]) port2 = int(portData[4:6]) port3 = int(portData[6:8]) port4 = int(portData[8:10]) port5 = int(portData[10:12]) port6 = int(portData[12:14]) port7 = int(portData[14:16]) port8 = int(portData[16:18]) port9 = int(portData[18:20]) port10 = int(portData[20:22]) device = int(portData[22:24]) return { 'cmdCode': cmdCode, 'port1': port1, 'port2': port2, 'port3': port3, 'port4': port4, 'port5': port5, 'port6': port6, 'port7': port7, 'port8': port8, 'port9': port9, 'port10': port10, 'device': device, } elif cmdCode == '31': # 宇泽家的，主动上报温度 portData = data[18:48] port1 = int(portData[2:4]) port2 = int(portData[4:6]) port3 = int(portData[6:8]) port4 = int(portData[8:10]) port5 = int(portData[10:12]) port6 = int(portData[12:14]) port7 = int(portData[14:16]) port8 = int(portData[16:18]) port9 = int(portData[18:20]) port10 = int(portData[20:22]) device = int(portData[22:24]) return { 'cmdCode': cmdCode, 'port1': port1, 'port2': port2, 'port3': port3, 'port4': port4, 'port5': port5, 'port6': port6, 'port7': port7, 'port8': port8, 'port9': port9, 'port10': port10, 'device': device, } elif cmdCode == '32': # 宇泽家的，主动上报温度 if data[18:20] == '01': return {'isYangan': True, 'cmdCode': cmdCode} else: return {'isYangan': False, 'cmdCode': cmdCode} elif cmdCode == '17': """ IC卡回收余额成功，上报回收的数目 样例 660F170048614800052DDA5A0D000001DD """ cardNo = int(data[18:26], 16) cardNo = str(cardNo) backMoney = int(data[26:30], 16) / 10.0 return {'cmdCode': cmdCode, 'cardNo': cardNo, 'backMoney': backMoney} elif cmdCode == '22': # ID卡，上报上来扣费 cardNo = int(data[18:26], 16) cardNo = str(cardNo) fee = int(data[26:28], 16) / 10.0 cardType = 'ID' if data[28:32] == 'AA33' else 'IC' return {'cmdCode': cmdCode, 'cardNo': cardNo, 'fee': fee, 'cardType': cardType} elif cmdCode == '23': # ID卡，上报上来扣费 cardNo = int(data[18:26], 16) cardNo = str(cardNo) status = data[26:28] return {'cmdCode': cmdCode, 'cardNo': cardNo, 'status': status} elif cmdCode == '35': temperature = int(data[18:20], 16) smoke = int(data[20:22], 16) voltage = int(data[22:26], 16) return {'cmdCode': cmdCode, 'temperature': temperature, 'smokeWarning': (smoke == 0x01), 'voltage': voltage} elif cmdCode == '41': return {'cmdCode': cmdCode, 'smokeWarning': True} def get_dev_consume_count(self): """ crc校验错 :return: """ devInfo = MessageSender.send(self.device, DeviceCmdCode.OPERATE_DEV_SYNC, {'IMEI': self._device['devNo'], "funCode": '07', 'data': '00'}) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试。也可能是您的设备版本过低，暂时不支持此功能'}) data = devInfo['data'][16::] cardFee = int(data[2:6], 16) / 10.0 # 以角为单位 coinFee = int(data[6:10], 16) # 以元为单位 return {'cardFee': cardFee, 'coinFee': coinFee} def get_port_info(self, line): data = fill_2_hexByte(hex(int(line)), 2) devInfo = MessageSender.send(self.device, self.make_random_cmdcode(), {'IMEI': self._device['devNo'], "funCode": '06', 'data': data}) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试。也可能是您的设备版本过低，暂时不支持此功能'}) data = devInfo['data'][16::] leftTime = int(data[4:8], 16) if data[8:12] == 'FFFF': power = 0 else: power = int(data[8:12], 16) / 10.0 data = {"port": line, "power": power} # 电量计费模式 if not self._device.get("otherConf", dict()).get("consumeMode", 0): data.update({"leftTime": leftTime}) else: data.update({"leftElec": leftTime / 100.0}) return data def get_port_status_from_dev(self): """ 访问设备，获取设备端口信息 :return: """ devInfo = MessageSender.send(device = self.device, cmd = DeviceCmdCode.PASSTHROUGH_OPERATE_DEV_SYNC, payload = { 'IMEI': self._device['devNo'], 'funCode': '01', 'data': 'EE0901{}'.format(make_six_bytes_session_id()) + '00' }) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试', 'rst': -1}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试。也可能是您的设备版本过低，暂时不支持此功能', 'rst': 1}) data = devInfo['data'][16::] result = {} portNum = int(data[2:4], 16) portData = data[4::] ii = 0 while ii < portNum: statusTemp = portData[ii * 2:ii * 2 + 2] if statusTemp == '01': status = {'status': Const.DEV_WORK_STATUS_IDLE} elif statusTemp == '02': status = {'status': Const.DEV_WORK_STATUS_WORKING} elif statusTemp == '03': status = {'status': Const.DEV_WORK_STATUS_FORBIDDEN} elif statusTemp == '04': status = {'status': Const.DEV_WORK_STATUS_FAULT} # 不再上述状态之列的 统一为故障状态 else: status = {'status': Const.DEV_WORK_STATUS_FAULT} ii += 1 result[str(ii)] = status allPorts, usedPorts, usePorts = self.get_port_static_info(result) # 这里存在多线程更新缓存的场景，可能性比较低，但是必须先取出来，然后逐个更新状态，然后再记录缓存 ctrInfo = Device.get_dev_control_cache(self._device['devNo']) for strPort, info in result.items(): if ctrInfo.has_key(strPort): ctrInfo[strPort].update({'status': info['status']}) else: ctrInfo[strPort] = info ctrInfo.update({ 'allPorts': allPorts, 'usedPorts': usedPorts, 'usePorts': usePorts }) Device.update_dev_control_cache(self.device.devNo, ctrInfo) return result def get_default_port_nums(self): default_num = 10 return default_num def get_port_status(self, force = False): if force: return self.get_port_status_from_dev() ctrInfo = Device.get_dev_control_cache(self.device.devNo) if 'allPorts' in ctrInfo and ctrInfo['allPorts'] > 0: allPorts = ctrInfo['allPorts'] else: allPorts = self.get_default_port_nums() statusDict = {} for ii in range(allPorts): tempDict = ctrInfo.get(str(ii + 1), {}) if tempDict.has_key('status'): statusDict[str(ii + 1)] = {'status': tempDict.get('status')} elif tempDict.has_key('isStart'): if tempDict['isStart']: statusDict[str(ii + 1)] = {'status': Const.DEV_WORK_STATUS_WORKING} else: statusDict[str(ii + 1)] = {'status': Const.DEV_WORK_STATUS_IDLE} else: statusDict[str(ii + 1)] = {'status': Const.DEV_WORK_STATUS_IDLE} return statusDict def lock_unlock_port(self, port, lock = True): lockStr = '00' if lock else '01' portStr = fill_2_hexByte(hex(int(port)), 2) devInfo = MessageSender.send(device = self.device, cmd = DeviceCmdCode.OPERATE_DEV_SYNC, payload = {'IMEI': self._device['devNo'], "funCode": '0A', 'data': portStr + lockStr}, timeout = MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'端口禁用功能只有带保险丝版本的才有。可能是您的设备版本过低，暂时不支持此功能，也可能是设备繁忙无响应。'}) data = devInfo['data'][18::] if data[0:2] == '01': # 表示成功 pass else: raise ServiceException({'result': 2, 'description': u'操作端口失败，请重试看能否解决'}) if lock: Device.update_dev_control_cache(self._device['devNo'], {str(port): {'status': Const.DEV_WORK_STATUS_FORBIDDEN}}) else: Device.update_dev_control_cache(self._device['devNo'], {str(port): {'status': Const.DEV_WORK_STATUS_IDLE}}) def active_deactive_port(self, port, active): if active: raise ServiceException({'result': 2, 'description': u'该设备不支持直接打开端口'}) self.stop_charging_port(port) devInfo = Device.get_dev_control_cache(self._device['devNo']) portCtrInfo = devInfo.get(str(port), {}) portCtrInfo.update({'isStart': False, 'status': Const.DEV_WORK_STATUS_IDLE, 'needTime': 0, 'leftTime': 0, 'endTime': datetime.datetime.now().strftime(Const.DATETIME_FMT)}) newValue = {str(port): portCtrInfo} Device.update_dev_control_cache(self._device['devNo'], newValue) def stop_charging_port(self, port): portStr = fill_2_hexByte(hex(int(port)), 2) devInfo = MessageSender.send(device = self.device, cmd = DeviceCmdCode.OPERATE_DEV_SYNC, payload = {'IMEI': self._device['devNo'], "funCode": '0B', 'data': portStr}, timeout = MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试。也可能是您的设备版本过低，暂时不支持此功能'}) data = devInfo['data'][16::] port = int(data[2:4], 16) leftTime = int(data[4:8], 16) data = {"port": port} # 电量计费模式 if not self._device.get("otherConf", dict()).get("consumeMode", 0): data.update({"remainder_time": leftTime}) else: data.update({"remainder_time": leftTime / 100.0}) return data def stop(self, port = None): return self.stop_charging_port(port) @property def isHaveStopEvent(self): return True def set_IC_coin_power_config(self, infoDict): data = '' data += fill_2_hexByte(hex(int(infoDict['maxPower'])), 4) data += fill_2_hexByte(hex(int(infoDict['icMoney'])), 2) data += fill_2_hexByte(hex(int(infoDict['time1'])), 4) data += fill_2_hexByte(hex(int(infoDict['time2'])), 4) data += fill_2_hexByte(hex(int(infoDict['time3'])), 4) devInfo = MessageSender.send(device = self.device, cmd = DeviceCmdCode.OPERATE_DEV_SYNC, payload = {'IMEI': self._device['devNo'], "funCode": '08', 'data': data}, timeout = MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试'}) def get_coin_card_enable(self): putCoins = self.device['otherConf'].get('putCoins', False) icCard = self.device['otherConf'].get('icCard', False) return {'putCoins': putCoins, 'icCard': icCard} def set_coin_card_enable(self, infoDict): data = '' if infoDict['putCoins']: data += '01' else: data += '00' if infoDict['icCard']: data += '01' else: data += '00' devInfo = MessageSender.send(device = self.device, cmd = DeviceCmdCode.OPERATE_DEV_SYNC, payload = {'IMEI': self._device['devNo'], "funCode": '09', 'data': data}, timeout = MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试。也可能是您的设备版本过低，暂时不支持此功能'}) else: Device.get_collection().update_one({'devNo': self._device['devNo']}, {'$set': { 'otherConf.putCoins': infoDict['putCoins'], 'otherConf.icCard': infoDict['icCard'], }}) Device.invalid_device_cache(self.device.devNo) def get_dev_setting(self): # 发送指令查询 resultDict = {} try: tempDict = self.get_fullstop_cardrefund() resultDict.update(tempDict) except: pass # try: # tempDict = self.get_gear_conf() # resultDict.update(tempDict) # except: # pass try: tempDict = self.get_all_dev_settings() resultDict.update(tempDict) except: pass try: tempDict = self.get_consume_mode_volume_andsoon_config() resultDict.update(tempDict) except: pass try: # 设置后保存到设备的参数 tempDict = self.get_coin_card_enable() resultDict.update(tempDict) except: pass try: tempDict = self.get_elec_rule() resultDict.update(tempDict) except: pass return resultDict def get_fullstop_cardrefund(self): devInfo = MessageSender.send(device = self.device, cmd = DeviceCmdCode.OPERATE_DEV_SYNC, payload = {'IMEI': self._device['devNo'], "funCode": '0C', 'data': '00'}, timeout = MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试。也可能是您的设备版本过低，暂时不支持此功能'}) confData = devInfo['data'][18::] maxPower = int(confData[0:4], 16) icMoney = int(confData[4:6], 16) if len(confData) > 6: time1 = int(confData[6:10], 16) time2 = int(confData[10:14], 16) time3 = int(confData[14:18], 16) else: time1, time2, time3 = 0, 0, 0 autoStop = True if confData[20:22] == u'01' else False cardRefund = True if confData[18:20] == u'01' else False return {'maxPower': maxPower} def set_fullstop_cardrefund(self, infoDict): data = '' if infoDict['autoStop']: data += '01' else: data += '00' if infoDict['cardRefund']: data += '01' else: data += '00' devInfo = MessageSender.send(device = self.device, cmd = DeviceCmdCode.OPERATE_DEV_SYNC, payload = {'IMEI': self._device['devNo'], "funCode": '13', 'data': data}, timeout = MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试。也可能是您的设备版本过低，暂时不支持此功能'}) def get_gear_conf(self): resultDict = {'power1': 0, 'power1ratio': 0, 'power2': 0, 'power2ratio': 0, 'power3': 0, 'power3ratio': 0} devInfo = MessageSender.send(device = self.device, cmd = DeviceCmdCode.OPERATE_DEV_SYNC, payload = {'IMEI': self._device['devNo'], "funCode": '15', 'data': '00'}, timeout = MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: return resultDict confData = devInfo['data'][18::] power1 = int(confData[0:4], 16) power1ratio = int(confData[4:6], 16) power2 = int(confData[6:10], 16) power2ratio = int(confData[10:12], 16) power3 = int(confData[12:16], 16) power3ratio = int(confData[16:18], 16) result = { 'power1': power1, 'power1ratio': power1ratio, 'power2': power2, 'power2ratio': power2ratio, 'power3': power3, 'power3ratio': power3ratio } if len(confData) > 31: power4 = int(confData[18:22], 16) power4ratio = int(confData[22:24], 16) power5 = int(confData[24:28], 16) power5ratio = int(confData[28:30], 16) result.update({'power4': power4, 'power4ratio': power4ratio, 'power5': power5, 'power5ratio': power5ratio}) return result def set_gear_conf(self, infoDict): data = '' data += fill_2_hexByte(hex(infoDict['power1']), 4) data += fill_2_hexByte(hex(infoDict['power1ratio']), 2) data += fill_2_hexByte(hex(infoDict['power2']), 4) data += fill_2_hexByte(hex(infoDict['power2ratio']), 2) data += fill_2_hexByte(hex(infoDict['power3']), 4) data += fill_2_hexByte(hex(infoDict['power3ratio']), 2) if infoDict.has_key('power4'): data += fill_2_hexByte(hex(int(infoDict['power4'])), 4) data += fill_2_hexByte(hex(int(infoDict['power4ratio'])), 2) data += fill_2_hexByte(hex(int(infoDict['power5'])), 4) data += fill_2_hexByte(hex(int(infoDict['power5ratio'])), 2) devInfo = MessageSender.send(device = self.device, cmd = DeviceCmdCode.OPERATE_DEV_SYNC, payload = {'IMEI': self._device['devNo'], "funCode": '14', 'data': data}, timeout = MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试。也可能是您的设备版本过低，暂时不支持此功能'}) def recharge_card(self, cardNo, money, orderNo = None): try: data = 'EE1012{}'.format(make_six_bytes_session_id()) cardNo = fill_2_hexByte(hex(int(cardNo)), 8) data += cardNo + fill_2_hexByte(hex(int(money * 10)), 4) + '0001' devInfo = MessageSender.send(device = self.device, cmd = DeviceCmdCode.PASSTHROUGH_OPERATE_DEV_SYNC, payload = {'IMEI': self._device['devNo'], 'data': data, 'funCode': '12'}, timeout = MQTT_TIMEOUT.LONGEST) if devInfo['rst'] != 0: if devInfo['rst'] == ErrorCode.DEVICE_CONN_FAIL: # 离线无法判断是否成功, 认为充值成功, 走售后解决 return { 'result': ErrorCode.DEVICE_CONN_FAIL, 'description': u'当前充电桩正在玩命找网络,请您稍候再试' }, None elif devInfo['rst'] == ErrorCode.BOARD_UART_TIMEOUT: return { 'result': ErrorCode.BOARD_UART_TIMEOUT, 'description': u'当前充电桩忙,无响应,请您稍候再试' }, None else: return { 'result': devInfo['rst'], 'description': u'系统异常' }, None resultData = devInfo['data'] if resultData[4:6] != '16': return { 'result': ErrorCode.PARAMETER_ERROR_TO_BOX, 'description': u'充值返回报文命令码不为16' }, None balance = RMB(int(resultData[26:30], 16)) * Decimal('0.1') result = True if resultData[34:36] == '01' else False if result: return { 'result': ErrorCode.SUCCESS, 'description': '' }, balance else: return { 'result': ErrorCode.IC_RECHARGE_FAIL, 'description': u'充值失败' }, balance except Exception as e: logger.exception(e) return { 'result': ErrorCode.EXCEPTION, 'description': e.message }, None def get_consume_mode_volume_andsoon_config(self): devInfo = MessageSender.send(device = self.device, cmd = DeviceCmdCode.OPERATE_DEV_SYNC, payload = {'IMEI': self._device['devNo'], "funCode": '2A', 'data': '00'}, timeout = MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试。也可能是您的设备版本过低，暂时不支持此功能'}) confData = devInfo['data'][18::] card1Time = int(confData[0:4], 16) card2Time = int(confData[4:8], 16) card3Time = int(confData[8:12], 16) consumeMode = int(confData[12:14]) volume = int(confData[14:16], 16) fuchongPower = int(confData[16:20], 16) * 0.1 fuchongTime = int(confData[20:24], 16) return { 'volume': volume, } def set_consume_mode_volume_config(self, infoDict): data = fill_2_hexByte(hex(int(infoDict.get('consumeMode', 5))), 2) data += fill_2_hexByte(hex(int(infoDict.get('volume', 5))), 2) devInfo = MessageSender.send(device = self.device, cmd = self.make_random_cmdcode(), payload = {'IMEI': self._device['devNo'], "funCode": '27', 'data': data}, timeout = MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试'}) def set_fuchong_config(self, infoDict): """ 已弃用 替代指令 37 :param infoDict: :return: """ data = fill_2_hexByte(hex(int(infoDict['fuchongPower']) * 10), 4) data += fill_2_hexByte(hex(int(infoDict['fuchongTime'])), 4) devInfo = MessageSender.send(device = self.device, cmd = DeviceCmdCode.OPERATE_DEV_SYNC, payload = {'IMEI': self._device['devNo'], "funCode": '28', 'data': data}, timeout = MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试'}) def set_card_time_config(self, infoDict): data = fill_2_hexByte(hex(int(infoDict['card1Time'])), 4) data += fill_2_hexByte(hex(int(infoDict['card2Time'])), 4) data += fill_2_hexByte(hex(int(infoDict['card3Time'])), 4) devInfo = MessageSender.send(device = self.device, cmd = self.make_random_cmdcode(), payload = {'IMEI': self._device['devNo'], "funCode": '29', 'data': data}, timeout = MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试'}) def set_fuchong_config_new(self, infoDict): data = fill_2_hexByte(hex(int(infoDict['fuchongPower']) * 10), 4) data += fill_2_hexByte(hex(int(infoDict['fuchongTime'])), 4) data += fill_2_hexByte(hex(int(infoDict['noloadTime'])), 4) devInfo = MessageSender.send(device=self.device, cmd=DeviceCmdCode.OPERATE_DEV_SYNC, payload={'IMEI': self._device['devNo'], "funCode": '37', 'data': data}, timeout=MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试'}) else: Device.get_collection().update_one({'devNo': self.device.devNo}, {'$set': { 'otherConf.fuchongPower': int(infoDict['fuchongPower']), 'otherConf.fuchongTime': int(infoDict['fuchongTime']), 'otherConf.noloadTime': int(infoDict['noloadTime']), }}) Device.invalid_device_cache(self.device.devNo) def set_elec_rule(self, infoDict): coinElec = int(infoDict['coinElec']) cardElec = int(infoDict['cardElec']) data = fill_2_hexByte(hex(coinElec), 4) data += fill_2_hexByte(hex(cardElec), 4) devInfo = MessageSender.send(device=self.device, cmd=DeviceCmdCode.OPERATE_DEV_SYNC, payload={'IMEI': self._device['devNo'], "funCode": '42', 'data': data}, timeout=MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试'}) # else: # Device.get_collection().update_one({'devNo': self.device.devNo}, # {'$set': { # 'otherConf.coinElec': coinElec, # 'otherConf.cardElec': cardElec # }}) # Device.invalid_device_cache(self.device.devNo) def get_elec_rule(self): # coinElec = self.device['otherConf'].get('coinElec', 0) # cardElec = self.device['otherConf'].get('coinElec', 0) devInfo = MessageSender.send(device=self.device, cmd=DeviceCmdCode.OPERATE_DEV_SYNC, payload={'IMEI': self._device['devNo'], "funCode": '47', 'data': '00'}, timeout=MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试。也可能是您的设备版本过低，暂时不支持此功能'}) confData = devInfo['data'][18::] coinElec = int(confData[:4], 16) cardElec = int(confData[4:8], 16) return {'coinElec': coinElec, 'cardElec': cardElec} def set_device_function(self, request, lastSetConf): if request.POST.has_key('putCoins'): # putCoins = True if request.POST.get('putCoins') == 'true' else False putCoins = request.POST.get("putCoins", False) lastSetConf.update({'putCoins': putCoins}) self.set_coin_card_enable(lastSetConf) if request.POST.has_key('icCard'): # icCard = True if request.POST.get('icCard') == 'true' else False icCard = request.POST.get("icCard", False) lastSetConf.update({'icCard': icCard}) self.set_coin_card_enable(lastSetConf) if request.POST.has_key('autoStop'): # autoStop = True if request.POST.get('autoStop') == 'true' else False autoStop = request.POST.get("autoStop", False) lastSetConf.update({'autoStop': autoStop}) self.set_fullstop_cardrefund(lastSetConf) if request.POST.has_key('cardRefund'): # cardRefund = True if request.POST.get('cardRefund') == 'true' else False cardRefund = request.POST.get("cardRefund", False) lastSetConf.update({'cardRefund': cardRefund}) self.set_fullstop_cardrefund(lastSetConf) if request.POST.has_key('consumeMode'): consumeMode = request.POST.get("consumeMode", False) lastSetConf.update({'consumeMode': consumeMode}) self.set_consume_mode_volume_config(lastSetConf) def set_device_function_param(self, request, lastSetConf): # 和 主板厂家沟通 目前已经不会存在 有maxPower这个控制选项 maxPower 就是分档功率中的最高档功率 if 'icMoney' in request.POST: lastSetConf.update({'icMoney': int(request.POST.get('icMoney', 0))}) lastSetConf.update({'maxPower': int(request.POST.get('maxPower', 0))}) self.set_IC_coin_power_config(lastSetConf) if 'time1' in request.POST and 'time2' in request.POST and 'time3' in request.POST: lastSetConf.update({'time1': int(request.POST.get('time1', 0))}) lastSetConf.update({'time2': int(request.POST.get('time2', 0))}) lastSetConf.update({'time3': int(request.POST.get('time3', 0))}) self.set_IC_coin_power_config(lastSetConf) if 'power1' in request.POST and 'power1ratio' in request.POST: lastSetConf.update({'power1': int(request.POST.get('power1', 0))}) lastSetConf.update({'power1ratio': int(request.POST.get('power1ratio', 0))}) lastSetConf.update({'power2': int(request.POST.get('power2', 0))}) lastSetConf.update({'power2ratio': int(request.POST.get('power2ratio', 0))}) lastSetConf.update({'power3': int(request.POST.get('power3', 0))}) lastSetConf.update({'power3ratio': int(request.POST.get('power3ratio', 0))}) lastSetConf.update({'power4': int(request.POST.get('power4', 0))}) lastSetConf.update({'power4ratio': int(request.POST.get('power4ratio', 0))}) lastSetConf.update({'power5': int(request.POST.get('power5', 0))}) lastSetConf.update({'power5ratio': int(request.POST.get('power5ratio', 0))}) self.set_gear_conf(lastSetConf) if 'card1Time' in request.POST and 'card2Time' in request.POST and 'card3Time' in request.POST: lastSetConf.update({'card1Time': int(request.POST.get('card1Time', 0))}) lastSetConf.update({'card2Time': int(request.POST.get('card2Time', 0))}) lastSetConf.update({'card3Time': int(request.POST.get('card3Time', 0))}) self.set_card_time_config(lastSetConf) if 'fuchongPower' in request.POST and 'fuchongTime' in request.POST: fuchongPower = 5 if request.POST.get('fuchongPower') == '' else int(request.POST.get('fuchongPower')) fuchongTime = 120 if request.POST.get('fuchongTime') == '' else int(request.POST.get('fuchongTime')) lastSetConf.update({'fuchongPower': fuchongPower}) lastSetConf.update({'fuchongTime': fuchongTime}) self.set_fuchong_config(lastSetConf) if 'refundProtectionTime' in request.POST: lastSetConf.update({'refundProtectionTime': int(request.POST.get('refundProtectionTime', 5))}) dev = Device.objects.get(devNo = self._device['devNo']) dev.otherConf.update({'refundProtectionTime': lastSetConf['refundProtectionTime']}) dev.save() if 'coinElec' in request.POST and 'cardElec' in request.POST: lastSetConf.update({'coinElec': request.POST['coinElec']}) lastSetConf.update({'cardElec': request.POST['cardElec']}) self.set_elec_rule(lastSetConf) if 'consumeMode' in request.POST and 'volume' in request.POST: lastSetConf.update({'consumeMode': request.POST['consumeMode']}) lastSetConf.update({'volume': request.POST['volume']}) self.set_consume_mode_volume_config(lastSetConf) Device.get_collection().update_one({'devNo': self._device['devNo']}, { '$set': {'otherConf.consumeMode': int(request.POST['consumeMode'])}}) Device.invalid_device_cache(self._device['devNo']) def response_card_status(self, cardNo, balance, status): data = 'EE1123{}'.format(make_six_bytes_session_id()) + fill_2_hexByte(hex(int(cardNo)), 4) + fill_2_hexByte( hex(int(balance * 10)), 4) + 'AA33' + status devInfo = MessageSender.send(self.device, DeviceCmdCode.PASSTHROUGH_OPERATE_DEV_SYNC, {'IMEI': self._device['devNo'], "funCode": '22', 'data': data}) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: # 等于1的时候，说明服务器和远程模块通讯OK，响应已经收到，不需要异常处理 raise ServiceException( {'result': 2, 'description': u'充电桩没有响应，可能是版本不对或者串口接线不良'}) resultData = devInfo['data'] if resultData[4:6] != '23': return {'status': '00'} backCardNo = int(resultData[18:26], 16) if backCardNo != int(cardNo): return {'status': '00'} return {'status': resultData[26:28]} def get_all_dev_settings(self): devInfo = MessageSender.send(device=self.device, cmd=DeviceCmdCode.OPERATE_DEV_SYNC, payload={'IMEI': self._device['devNo'], "funCode": '36', 'data': '00'}, timeout=MQTT_TIMEOUT.SHORT) if devInfo.has_key('rst') and devInfo['rst'] != 0: if devInfo['rst'] == -1: raise ServiceException( {'result': 2, 'description': u'充电桩正在玩命找网络,请您稍候再试'}) elif devInfo['rst'] == 1: raise ServiceException( {'result': 2, 'description': u'充电桩忙,无响应,请您稍候再试。也可能是您的设备版本过低，暂时不支持此功能'}) confData = devInfo['data'][18::] time1 = int(confData[:4], 16) time2 = int(confData[4:8], 16) time3 = int(confData[8:12], 16) card1Time = int(confData[12:16], 16) card2Time = int(confData[16:20], 16) card3Time = int(confData[20:24], 16) icMoney = int(confData[24:28], 16) cardRefund = True if confData[28:30] == u'01' else False power1 = int(confData[30:34], 16) power1ratio = int(confData[34:36], 16) power2 = int(confData[36:40], 16) power2ratio = int(confData[40:42], 16) power3 = int(confData[42:46], 16) power3ratio = int(confData[46:48], 16) power4 = int(confData[48:52], 16) power4ratio = int(confData[52:54], 16) power5 = int(confData[54:58], 16) power5ratio = int(confData[58:60], 16) autoStop = True if confData[60:62] == u'01' else False fuchongPower = int(confData[62:66], 16) fuchongTime = int(confData[66:70], 16) noloadTime = int(confData[70:74], 16) freeMode = int(confData[74:76], 16) consumeProcess = int(confData[76:78], 16) # consumeMode = int(confData[78:80], 16) #无效 consumeMode = freeMode return { 'time1': time1, 'time2': time2, 'time3': time3, 'card1Time': card1Time, 'card2Time': card2Time, 'card3Time': card3Time, 'icMoney': icMoney, 'cardRefund': cardRefund, 'power1': power1, 'power1ratio': power1ratio, 'power2': power2, 'power2ratio': power2ratio, 'power3': power3, 'power3ratio': power3ratio, 'power4': power4, 'power4ratio': power4ratio, 'power5': power5, 'power5ratio': power5ratio, 'autoStop': autoStop, 'fuchongPower': fuchongPower, 'fuchongTime': fuchongTime, # 'noloadTime': noloadTime, 'consumeMode': consumeMode, # 'consumeProcess': consumeProcess, # 'consumeMode': consumeMode, } def format_upload_power(self, power): return float(power / 10)